MINERGOTCHI - NerdMiner v2+ - full device easy to use - ESP32 Based - SoloMiner - low power device!

This is a full device, ready to be used, no solder required. just connect to wifi and add your BTC address

• This is innovative device is perfect for placement on your shelf or desk, offering you the thrilling opportunity to mine a Bitcoin block. With each block currently valued at 6.25BTC, the potential rewards are exceptional.

Based on TTGO TDisplay Device - Average Speed is 40-78 KH/S.

NerdMiner v2+ optimization : press the second button to TURBO Mode and power off the screen and boost the speed of calculation ( up to 120KH/s)

Easy to use :

• 1) Plug the device to an usb power
• 2) Connect to NerdMinerAP
• AP: NerdMinerAP
• PASSWORD : MineYourCoins
• 3)Set up your Wifi Network
• 4)Add your BTC address
• 5) Change the password if needed or pool url

How to reset the device : Press and hold a button for 5+ seconds and the device will reset.

READ CAREFULLY : You have A VERY LOW chance to mine a block. Multiple devices are suggested to improve your luck. Good luck!

OPENSOURCE DISCLAMER: Important Information READ THIS CAREFULLY: Due to the open-source nature of this project, we do not offer any post-sale warranty. The device is tested and working before shipping, but there is no warranty after shipping as you are free to change the code, flash, or modify everything inside.

OpenSource Fork by Han by Valerio Vaccaro and NerdMiner_v2 from BitMaker Source code : https://github.com/MXZZ/NerdMiner_v2

Shipped in a protected box, with tracking code