Tiny MicroFC SiPM breakout board

Name: Tiny MicroFC SiPM breakout board
SKU: 31304
Price: 1.99 USD
Availability: InStock

Tiny 1 x 1 cm carrier board for a single 6 mm C-Series MicroFC-60035 silicon photomultiplier.

Designed by NuclearPhoenix in Austria

2023-08-21T10:49:11.679Z-20230821_123940.jpg

2023-08-21T10:49:11.679Z-20230821_124003.jpg

2023-08-21T10:49:11.679Z-20230821_123951.jpg

2023-08-21T10:49:11.679Z-20230821_124026.jpg

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

Please consider investing a minute of your time and giving me a honest review :-)

Tiny 1 x 1 cm carrier board for a single 6 mm C-Series MicroFC-60035 silicon photomultiplier.

Tiny carrier board for a 6 mm C-Series MICROFC-60035-SMT silicon photomultiplier by onsemi designed specifically to work with the Open Gamma Detector, but can be used with any other system. PCB size…

Tiny carrier board for a 6 mm C-Series MICROFC-60035-SMT silicon photomultiplier by onsemi designed specifically to work with the Open Gamma Detector, but can be used with any other system.

PCB size is 10 x 10 mm. The solder pads for the SiPM are slightly bigger than they need to so that you can easily hand-solder everything! On the front side there is only the sensor itself while all the other parts are on the back. This ensures good optical contact and light-tight sealing. The PCB color is white and surface finish is ENIG.

The PCB includes an RC low-pass filter that is optional to use. Use it by mounting the two 0603 components, then soldering wires to the VCC and GND pads respectively. The SiPM signal will then be the anode A pad. Do not solder anything to the cathode pad in this case.

If you are connecting straight to the SiPM, do so via the cathode C and anode A pads. You do not need the GND pad in that case.

More info on GitHub: OpenGammaProject/Tiny-MicroFC-Carrier-Board