1" diameter round blinky earring/pendant boardDesigned by Geppetto Electronics, Ships from United States of America
What is it? It is a 1" diameter board with 8 SMD LEDs equally spaced around the perimeter. It has an ATTiny84 with a pin connected to each LED, a small SMD push button to turn it on and off and cha...Read More…
It is a 1" diameter board with 8 SMD LEDs equally spaced around the perimeter. It has an ATTiny84 with a pin connected to each LED, a small SMD push button to turn it on and off and change the blinking patterns, and a CR1220 battery clip and an AVR ISP interface on the back.
It comes with firmware that makes the lights blink in one of 5 different patterns. You push the button to change the pattern, and hold the button for a quarter second to turn it off. While powered off, the battery drain is near zero, so the battery will last as long as its shelf life. In operation, you can expect to get about an evening out of a single battery, depending on the pattern chosen.
You can use a pogo pin programming adapter on the AVR programming interface on the back to load your own firmware if you like.
It is 1 inch in diameter, with a small bump at the top with an 18 gauge hole for mounting.
I originally made it for fun. At Maker Faire 2015, I made and sold them as a demonstration of maker reflow SMD assembly.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!