Arduino Uno "3H" Project Enclosure

This is an enclosure I designed for the Arduino Uno. It comes as 6 separate acrylic panels that you can assemble easily with the included aluminum standoffs and screws. A small board spacer is also provided to lift the Arduino board up enough that it can be secured level and without cracking the bottom plate of the enclosure.

This model is very similar to my Duo-II model, but is just a little shorter (1.5" instead of 2").

Features

• 1 1/2" inside height provides plenty of space for most shields or your own design
• Uses hexagonal aluminum standoffs on the corners for superior strength and rigidity
• Slots built into the top and rear panel for routing wires in and out of the enclosure.
• Laser cut for a precise fit from 3mm cast acrylic
• Available in a variety of colors
• Easy to assemble and disassemble repeatedly without breaking. Doesn't fatigue like most acrylic "snap-fit" designs.

What's Included

• 7-piece interlocking acrylic panels
• Acrylic board support (2 versions for different Uno manufactured models)
• 4x 3/16" hexagonal aluminum standoffs, 1 1/2" long
• 8x 5/16" 4-40 screws
• 2x 1/2" 4-40 screws
• 2x 4-40 hex nuts

A larger but similar version of this enclosure is also available.