This product is no longer available for sale. The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.
0.96" OLED i2c Display (3.3V only)
This display can not be used on the Arduino UNO or other boards that run at 5.0V. Purchase the 3.3V-5.0V version that has an on board power supply and level converters.
-compatible with the Adafruit Graphics Library with small change of the address from 0x3D to 0x3C or use my test code here: https://sites.google.com/site/0miker0/oled-displays
-display colour is white.
-current draw varies with brightness and pixels lit. The display draws between 8mA - 12mA.
-dimensions are 26.7mm from right to left, 26mm from top to bottom and 5mm thick
-4.7K - 10K pullup resistors are needed on both i2c lines SDA & SCL to 3.3V
-towards the end of the init function it also has a rotate 180 degree command which might come in handy.
-data sheet for the glass is at: http://www.buy-display.com/default/oled-display-module.html
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Hardware Designer using tiny microcontrollers based on Atmel AVR's and Oled displays. Large supporter of Open Source designs and the sharing of knowledge.