Avr High Voltage Parallel Fuse Repair ProgrammerDesigned by microprogrammers in Canada
** Avr High Voltage Parallel Fuse Repair Programmer ** Don't throw away your locked AVR's! Unlock them with this easy to use stand alone device. This device is an AVR HIGH VOLTAGE PARALLEL programm...Read More…
Don't throw away your locked AVR's! Unlock them with this easy to use stand alone device. This device is an AVR HIGH VOLTAGE PARALLEL programmer that is designed to program all fuses, regardless of the current state of the fuses. If you mistakenly programmed the RSTDISBL fuse, OR disabled the SPIEN fuse, or programmed the wrong values in the CKSEL fuses, NO PROBLEM! Simply insert any AVR from device list below and connect power. Within one second, fuses will be restored to factory settings. Green LED indicates success, Yellow LED indicates programming error. It's that easy! No computer required!
Once restored, you can program the AVR using your favorite ISP programmer and software.
NEVER WORRY ABOUT PROGRAMMING YOUR AVR AGAIN!
To preserve the flash and eeprom contents while repairing the fuses, simply install jumper J1. (In this mode, the programmer will not restore the fuses if the LOCK bits were programmed, the erase function MUST be enabled.)
YOU MUST USE A POWER SUPPLY THAT EXCEEDS 13.5 VDC with positive center (not included) to ensure reliability in programming. Instructions will be included with purchase. It is a good idea to measure your power supply to ensure correct voltage and polarity. I am trying to keep the cost and shipping weight down, therefore the power supply cannot be included with this item.
Supported Devices for Atmega Fuse Repair Programmer (45 Devices in Total) If your device is not listed in the table below you can still repair it using terminal mode. This mode requires a connection from the programmer to your USBtoTTL converter (not included) and uses any basic terminal program @9600 bps.
|Socket #1||Socket #2||Socket #3||Socket #4||Socket #5|
The following devices are supported, however they must be wired to any socket.
ATtiny43U* ATtiny87 ATtiny88* ATtiny167
(Indicates device not tested) ** (All SMD pins must be wired directly to the socket) This is the easiest and most convenient tool you will ever use!
The power supply is not included. I am trying to keep this item as affordable as possible. The extra weight involved would increase the shipping cost greatly. If you would like to purchase the power supply please send me a message.
ONCE PAYMENT HAS BEEN RECEIVED, ITEM SHIPS IMMEDIATELY
(or latest, Next business day)
|Shipping Rate||Ships From||First item||Additional items|
Canada Post: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!