TO BE ADED
A standard microscope objective adapter for Sony E-mount cameras.
The five-piece set includes
The E-mount adapters and RMS adapters are equipped with anodized aluminum connectors. The E-mount tube, tube extension, and RMS adopter cone are made of 3D printed PLA.
Different adapter lengths [160mm, 140mm, 120mm, 100mm, 80mm, or 60mm] can be assembled, each provide different magnification.
The length of 160mm is the nominal length for standard microscope objectives. However, good images at lower magnifications are obtained by the different tube length as shown in the attached images.
Sony macro lens image is also shown for comparison.
Please note that focusing is manual, and requires a good and stable tripod.
I needed a microscope macro adapter for my Sony camera to be used in a scanner I'm building. I purchased a commercial extension tube from a very reputable optical equipment supplier. However, it did not perform well in High Dynamic Range (HDR) conditions, explicitly scanning a B/W film negative. I, therefore, build my own adapter, which I am now using and is identical to the one that is offered here.
The product utilizes a special inner geometry that significantly reduced unwanted reflections from reaching the camera. The product is also provided as a set to allow six different magnifications from the same microscope objective.
|Shipping Rate||First item||Additional items|
United States Postal Service: Standard Ground Rate
USPS is the best option for this item. UPS and FedEx are available upon request
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
TO BE ADDED