Shipping to United States starts at $0.95
We all love OLED displays but most of them come with those pesky flex cable connectors that's a bit hard to uses for prototyping.
The OLEDY breakout boards(s) makes your prototyping with OLEDs, LCDs and other devices with flex connectors easier to handle. The OLEDY breakout handles 8 different pitches, 0.50, 0.60, 0.62, 0.65, 0.70, 0.80, 0.845 and 1.00 mm, with up to 32 pins.
Please be aware that the 0.60 and 0.65 as mislabeled on the current boards.
The board you'll receive snaps apart into two boards sized 2.5 by 5 cm where each board have 4 pitches depending how you turn the board.
The example picture shows a 25 pin 0.60mm pitch OLED connected to a OLEDY board. It was really easy to solder it up - it took less than a minute and no solder bridges. Even the 0.50 pitch have soldermask between the pads.
You'll get the PCB (breaks apart into two) and a 40-pin pinheader.
|Shipping Rate||First item||Additional items|
Pos Malaysia: Airmail
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I'm a Swedish expat currently living in Malaysia. I've been tinkering with electronics since mid 1970's and I'm a strong believer in Open Source - both hardware and software.
Email me at firstname.lastname@example.org. You can also find me at twitter @matseng or as the user "matseng" at http://dangerousprototypes.com/forum where I'm usually publish my projects and hang out in general. I also have some repos at https://github.com/SmallRoomLabs