Nano with ATmega328P and CH340 chip, compatible with Arduino Nano.

The Nano is built like an original Arduino Nano. However, it has a few extra features, such as a USB-C port for programming and an overvoltage protection (USB-C socket and the 5V pin of the Nano).

The bootloader has already been flashed. So you can start progamming right away.

Technical data:

Microcontroller: Atmel ATmega328P
Clock Speed: 16 MHz
Operating voltage: 5 V
Input voltage: (VIN) 7-12 V
Current per I/O pin: 20 mA
Digital I/O pins: 14 (6 PWM)
Analog Input Pins: 8
Flash memory: 32 KB
SRAM: 2 KB
EEPROM: 1 KB
USB connector: USB-C socket
USB chip: CH340G
Length: 43 mm
Width: 18 mm

IMPORTANT: The Nano uses the CH340 USB controller, if you use Windows the corresponding driver may have to be downloaded!

The driver for the CH340 can be found here: http://www.wch-ic.com/downloads/CH341SER_ZIP.html