Adapter board to power and connect iC880A LoRaWAN Concentrator board to Raspberry PI. Supports Passive PoEDesigned by Marcel, Ships from Slovakia
See pictures for before and after of LoRaWAN Gateway installation. This is two designs in one: Adapter board to connect iC880A LoRaWAN Concentrator from IMST to Raspberry PI (2, 3 or Zero) - s...Read More…
See pictures for before and after of LoRaWAN Gateway installation.
This is two designs in one:
This essentially means, that if you have LoRaWAN Concentrator build with iC880A (SPI version) and RPI you can use this board to supply power to the RPI over passive PoE, connect RPI to ethernet and connect the LoRaWAN concentrator to RPI all at once.
Just use any passive PoE injector, a piece of short ethernet cable and a standard wall wart power supply with barrel connector (2.1mm, preferably around 24V DC @ 2A - NOT supplied), run the main ethernet cable from indoors to outdoors to the concentrator box, put the RPI with LoRaWAN concentrator into a box, connect pigtail and antenna and you are ready to IoT!
So the architecture would be: INDOORS (wall wart, ethernet switch, PoE injector) ----- long main ethernet cable ----- OUTSIDE (box with RPI, iC880A, this connection board and piece of short ethernet cable) Done. No extra to fluff around.
Fully compatible with ic880a-gateway
If you need help sourcing any of the mentioned bits, message me and I'll get back to you ASAP. You can click on the 'contact me' on the right hand side of this page under the store info.
Niels | May 24, 2018
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!