new version with button and menu for more options + 3D printed enclosureDesigned by 13-37 electronics, Ships from Germany
Listen to your plants and create your own music together with them and your MIDI Biodata Sonification System. By attaching electrodes to the leaves of a plant or skin, fluctuations in galvanic cond...Read More…
Listen to your plants and create your own music together with them and your MIDI Biodata Sonification System.
By attaching electrodes to the leaves of a plant or skin, fluctuations in galvanic conductance will produce MIDI notes, which are transmitted on a configurable MIDI channel. With a maximum of 5 note polyphony (matching the LEDs).
Through sampling pulse widths and identifying fluctuations, MIDI note and control messages are generated.Features include Threshold, Scaling, Control Number, and Control Voltage using PWM through an RC Low Pass filter.
Note that you do need a software or hardware MIDI synthesizer to use this device.
It uses the same galvanic conductance sensing circuitry known from Sam Cusumano’s MIDI Biodata Sonification System but runs a modified firmware and has some nice addons:
A control message is transmitted on CC 80, which is also presented as a 'Control Voltage' output via an unpopulated pin header - to modular synthesizers and equipment.
For more information about the device, usage examples and to share experiences, join the MIDI Biodata Sonification forum hosted by Sam Cusumano, who originally designed this technology.
A basic set of accessories is selected by default. A ready-to-use configuration with almost everything to get started. (except 3x1,5V AA batteries!)
Currently the electrodes and cables are not available separately, but I will add them in the near future. You can contact me for replacement parts in the meantime.
The enclosure is available standalone: Enclosure for MIDI Biodata Sonification Device
If you choose the "custom color" options, let me know the color of your like me via email (firstname.lastname@example.org) or via Tindie message. You can also add a note during checkout.
Also feel free to ask for colors that are not listed yet.
Sometimes failed prints of the enclosure are available for reduced prices or even free. These have optical defects but will work fine.
The settings menu works with an extra button and the knob to set threshold, MIDI channel, note scale and LED brightness.
In the first menu level, you can select the setting to be changed by the following color coding.
|Threshold||red||Selectivity of the electrodes. Moving it further away from the OFF-position decreases sensitivity.|
|Note Scale||yellow||Chromatic, Major, Indian and Minor scale are available. The corresponding LED flashes after entering this setting and the scale can be selected using the knob. Press button to apply and leave the menu.|
|MIDI Channel||green||Select MIDI-Channel 1-16 by turning the knob. You’ll need MIDI equipment connected to see changes. No LED effects.|
|LED Brightness||blue||Select LED effects brightness. From zero to full by using the knob. Blue LED is flashing to indicate the selected brightness. Can be used to save some power.|
To restore default settings, press the button during power-on. It will acknowledge the reset by blinking white.
The device is available as as DIY Kit with only the surface-mount components pre-soldered or fully assembled as selected by default.
These parts have to be soldered in the DIY Kit:
MIDI Biodata sonification device Logo designed by DipthDesign
|Shipping Rate||First item||Additional items|
Deutsche Post: Large Registered Letter
Arwyn | March 11, 2019
Cyril | Feb. 21, 2019
Oliver | Nov. 19, 2018
Alison | Aug. 27, 2018
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
13-37.org open hardware shop was founded in 2017 by Manuel J. Domke with the mission to make more open-source hardware available for the german and european market.
While searching for useful gadgets I often stumbled upon great open-source projects which unfortunately do not get attention they deserve - or simply are not available as a product (yet/anymore).
This is where we step in by improving, producing and making these products possible.
Mail: email@example.com (PGP Key-ID: FAA4 4845 C10B 81E5 44E8 CD6B 586F A604 E3C8 1B99)
Phone/Fax: +49 611 8802 6666