Shipping to United States starts at $5.00
Due to being rather busy with "life" as such, I can only ship once a week.
Useful for very small circuit boards, where every mm counts and you can't do without a programming connection. Pogo-pin spacing is 1.27mm (50mil). The required board-space for this connector is just about 1/4 of your typical 6-pin ISP connector.
The adapter does not self-lock to the target board and requires to be pressed down while programming. Pin alignment is accomplished by small drill holes in the pads.
Assembly is reasonably easy if you're a regular user of the soldering iron and like tiny, fiddly SMD bits. However, you will definitely need patience.
The long pads on the PCB help with alignment of the pins. Flux the board, align a pin so it sits right in the middle of the split pad, tack it on one side, press it down with tweezers and solder the other half of its length. Finish the other 50% as before. Use flux liberally, be patient. Make sure you don't get any solder on any moving parts.
Martin | Sept. 25, 2017
Paul | June 6, 2016
Ontje | Oct. 22, 2015
Bernie | July 23, 2015
Mike | Dec. 3, 2014
Nicholas | Aug. 22, 2014
Philip | April 13, 2014
|Shipping Rate||First item||Additional items|
Deutsche Post: Standard Ground Rate
>> No tracking, no insurance << If you cannot trust your country's postal service, don't use this!
Deutsche Post: Registered mail (tracable, insured)
If you cannot trust your country's postal service, I suggest using this!
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Sharing the fun and joy of playing with small electronics bits.