WiFi Deauther Monster

Be careful: Connect the battery in the right way!
Otherwise the protection IC (IP5306) will burn and you will have to replace it.

This product does not include a battery.

We recommed two LG 3350 mAh flat 18650 battery.

Changes

• Support two battery charging
• Added Flash light function
• Added two USB output
• Added RGB LED (WS2812b or Neopixel LED)
• Navigation buttons replaced by a 3 way momentary slide switch
• Fixed battery issue: no more battery activation needed with USB
• Board color is now red
• Charging current increased from 1.3A to 2A.
• New improved power management

What is it

This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.
It comes installed with the latest ESP8266 Deauther software.
With this software, you can perform different attacks to test WiFi networks.
Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit:
github.com/spacehuhn/esp8266_deauther.

You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

GPIOs and hardware info

Display: SH1106 1.3" OLED

Display SDA: GPIO 5 (D1)

Display SCL/SCK: GPIO 4 (D2)

WS2812b LED: GPIO 15 (D8)

Button Up: GPIO 12

Button Down: GPIO 13

Button Select: GPIO 14

Why did you make it

I designed this development board specially for Spacehuhn's great project: ESP8266 Deauther
It has been authorized by him and is officially supported.

Thanks to every customer that leaves feedback! I will keep improving this board.

What makes it special

• Only ~100mA power usage
• Up to 35h of battery life with a 3500mAh 18650 cell
• Up to 2A charging current
• Up to 2.8A output current
• Included 8dB antenna
• 4 LEDs to indicate battery status in real time
• Power button: Click to turn on, double click to turn off
• Protection: short, over charging, over discharging, temperature

Usage

You can use it with the display and buttons: https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-Buttons

You can also connect to "pwned" with the password "deauther" and use the web interface: https://github.com/spacehuhn/esp8266_deauther/wiki/Web

If you lost the password you can reset it: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQ#how-to-do-a-reset

Disclaimer

Use it only for testing and educational purposes against your own devices!
I don't take responsibility for what you do with it.

Please check the legal regulations for your country to make sure you don't violate any laws.