DSTIKE WiFi Deauther MiNi V3

Name: DSTIKE WiFi Deauther MiNi V3
SKU: 13258
Price: 19.00 USD
Availability: InStock
Rating: 4.81 (13 reviews)

(13 Reviews)

www.deauther.com

Designed by Travis Lin in China

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

www.deauther.com

Update Log Difference DeautherMiNi DeautherMiNiV3 ESP07 4MB 4MB PowerSwitch NO YES RTC NO DS3231 USB Micro USB USB-C What is it? Deauther MiNi is still an ESP8266 development board,It…

Update Log

Difference	DeautherMiNi	DeautherMiNiV3
ESP07	4MB	4MB
PowerSwitch	NO	YES
RTC	NO	DS3231
USB	Micro USB	USB-C

What is it?

Deauther MiNi is still an ESP8266 development board,It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.Please note that the ESP8266 does only support 2.4GHz.You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.

Why did you make it?

I designed this development board especially for Spacehuhn's great project: ESP8266 Deauther. It has been authorized by him and is officially supported.
Thanks to every customer that leaves feedback! I will keep improving this board.

Function

Deauther Attack: Disconnect 2.4G WiFi
Deauther Beacon: Create fake networks
Deauther Probe：Confuse wifi trackers
Packet Monitor：Display wifi traffic

GPIOs and hardware info:

Display: SH1106 1.3" OLED
Display SDA: GPIO 5
Display SCL/SCK: GPIO 4
WS2812b LED: GPIO 15
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
High Light LED: GPIO16
All ESP8266 pins break out.

What makes it special?

Only ~80mA power usage
TP4056x power solution
Included 5dB antenna
All GPIO breakouts and 3.3 and 5V output
2 LEDs to indicate battery charging status (Red:Charging,Green:Full)

Disclaimer

This project is a proof of concept for testing and educational purposes. Neither the ESP8266, nor its SDK was meant or built for such purposes. Bugs can occur!

Use it only against your own networks and devices! Please check the legal regulations in your country before using it. We don't take any responsibility for what you do with this program.

More Info

Deauth

Closes the connection of WiFi devices by sending deauthentication frames to access points and client devices you selected. This is only possible because a lot of devices don't use the 802.11w-2009 standard that offers a protection against this attack. Please only select one target! When you select multiple targets that run on different channels and start the attack, it will quickly switch between those channels and you have no chance to reconnect to the access point that hosts this web interface.

Beacon

Beacon packets are used to advertise access points. By continuously sending beacon packets out, it will look like you created new WiFi networks. You can specify the network names under SSIDs.

Probe

Probe requests are sent by client devices to ask if a known network is nearby. Use this attack to confuse WiFi trackers by asking for networks that you specified in the SSID list. It's unlikely you will see any impact by this attack with your home network.

Videos

Software 2.6.0 Introduction

How to increase the maximum effect of antenna

How to connect smart phone

DSTIKE Deauther Watch Demo

NTP Time server functions

How to install DSTIKE Arduino environment

How to use 8266 flash tool flash deauther firmware

No country selected, please select your country to see shipping options.

Change Destination Country:

Quantity	Price
1-9	$19.00
10-49	$13.00
50+	$10.00

Review Breakdown

Average Ratings

Product: (5.00)

Documentation: (4.85)

Shipping: (4.54)

Communication: (4.85)

Allison | Aug. 16, 2023

Excellent board

I'm very pleased with the DSTIKE MiNi V3, it's not too expensive and has a great OLED display as well as USB-C port. It's not got the best radio range, but there's plenty of things you could do to help it, like following the video guide on removing a resistor or by constructing a parabolic reflector. I've been mostly getting into coding with this thing, and it has enough memory to do basically whatever I want to do with it.

The seller is also very friendly and quick to respond when it came to another product I ordered, so there's no doubt that if my MiNi V3 came damaged, or if I had an issue, I would have received timely help.

It took 13 days to ship to Australia, something that I thought wasn't possible. Cheers to the seller for using a super quick shipping option! :)

My only criticism and something that would be nice to see in a potential V4 release, is if the LED on the back could be removed. There's two LEDs on the front that I can control easily, but there's one on the back that seems to just stay on no matter what I do. It's not too annoying, but I think the two LEDs on the front would be enough.

Brian | Nov. 29, 2020

Great device for the money.

Very cool device. Good documentation and a quality piece of kit considering the price. Already shopping for an upgrade.

Alexander | July 12, 2020

Excellent build quality!

This is an awesome little gadget. I bought it to test a bunch of routers to see if they are vulnerable to this attack, and my main router sadly is vulnerable. I have talked to the manufacturer, and hopefully they will issue a firmware update.

The item comes from China, but the shipping to Canada was *insanely* fast. Definitely less than a week, which is amazing considering the state of global shipping at the moment.

The fact that it comes with a spare battery connector is just a really nice touch! I often don't have JST connectors on hand so the inclusion of one is super thoughtful. Build quality is very nice. The OLED is nice and crisp. The only confusing thing is the white LED. There's an option to turn it on in the menu, which then blinds you until you turn it off. I suppose you could use it as a flashlight, but it seems like a weird thing to add to this board. Maybe there is a reason for it that I'm missing?

The documentation is excellent. Using the device is super easy -- the OLED interface is very responsive and fast. Due to the limitations of the ESP8266, it slows to a crawl if you try to use the web interface and the OLED interface at the same time. This isn't the fault of the developer, it's just a lot of work for this processor to handle. Unless you have a reason to, just use the OLED interface. It also has a serial interface in case something goes wrong and you need to debug.

Of course, the firmware and code is freely available, so you can use any ESP8266 board. I tried it with my Adafruit HUZZAH before the DSTIKE arrived, and it worked fairly well, but the OLED interface is just way faster and easier to use.

Overall, I am extremely impressed and super happy with my purchase!

Joshuah | June 10, 2020

Awesome

This is legit. I actually bought the device with the purpose of putting my own code on it for some RFID stuff I'm doing. The interface is really nice. I'm surprised at how well the Mini V2 works. There are a lot of options and it's super simple to use. I'm not going to erase this device. I'm going to have to buy a second one for my RFID work.

Shipping was slow right now but that's understandable with Covid-19. I've purchased something from the seller previously and received it quickly.

Thanks!

Malick | Feb. 5, 2020

Slow shipping. Documentation Good.

The product is perfect. The shipping took exactly 3 weeks. Communication from seller was good. Overall not bad but shipping needs improvement.

Greg | Jan. 3, 2020

Deauther mini

Works great. Does what its suppose to, waited close to a month for this and it was well worth waiting. 👍

Bernard | Dec. 24, 2019

Happy

Knew about the deauther by youtube channels Nullbyte and Seytonic. This got me curious how it works and wanted to learn more by buying one.Really satisfied with the costumer service. At first had problems with a faulty usb cable that i connected and the deauther wasn't responding so notified to the costumer service thinking that it was defective but later then i used a good one and eveything ok. (Sorry Again) Haven't kick anybody from their wifi but had a lot of fun with the ssid random mode feature. It works fine but just one concern, maybe it's nothing: Is it normal that green light is full and the red light keeps blinking? I'm using a 2000mAh mini battery bank 5V 1A.
Any suggestions or recommendations? Thank You!

Adrian | Nov. 21, 2019

Could not be happier

Wonderful product.
Not only is this a great dev board, but when loaded with spacehuhn's deauther code, makes an awesome way to shut up the next door neighbours 1:30am spotify sessions.

Truly a godsend!
Thank you linesmen, thankyou ball boys, thank you Travis and thank you Spacehuhn.

Best $12 I ever spent.

Mark | Aug. 18, 2019

Deauther is exactly as advertised

I practically never write reviews, however I feel compelled to do so for this product. I received the Deauther Mini V2 earlier than expected. I was skeptical that, I a layman of electrical components would be able to work this Mini V2 as advertised. After fiddling around with it briefly my concerns was no more. It works perfectly and couldn't be more pleased. I highly recommend this Deauther too anyone wanting a bare Bones WiFi Deauther.

Dragos | April 17, 2019

Cool - now I can get revenge on my neighbors

This thing actually works, even on secure network.
I might order a few more because it is awesome.

It has an LCD with a menu and can be controlled by joystick.
A good thing would be a case and a battery, which would turn this into a mobile hacking device.

Robert | Dec. 7, 2018

Awesome

Works scary fast and does everything it says it does. I will be getting another one in the near future. First time ordering from overseas and great customer service thank you.

Aidan | Oct. 16, 2018

Just perfect

Good PCB, like the orange-ish yellow. Works absolutely perfectly. Perfect Perfect Perfect perfect perfect

Joe | Oct. 6, 2018

Great! Geared for more of a DIY

Just like the V3, it's a great device. The only con about this board is it doesn't come with an acrylic front peice, and maybe a bottom to fit a small battery pack because this is nice and small and would fit small drone batteries perfect, and have a nice pH 2.0 connection to connect a battery or battery pack etc. You're not just limited to the micro USB and the 18 650. That would definitely be a game changer to add and acrylic setup to this board, possibly a small battery pack. That would make it the ultimate grab-and-go, super compact device thats ready to go out the box. Amazing product, i expect nothing less from spacehuhn and DSTIKE :)

+ Show 8 more