Tindie

Raspberry Pi JTAG Programmer

(1 Review)

A Raspberry Pi hat to turn it into a JTAG programmer

Designed by Retro Supplies in United Kingdom

Raspberry Pi JTAG Programmer 1

Raspberry Pi JTAG Programmer 2

Raspberry Pi JTAG Programmer 3

Raspberry Pi JTAG Programmer 4

2022-09-24T17:28:26.504Z-PXL_20220922_155547049.jpg

2022-09-24T17:28:26.504Z-PXL_20220922_144131595.jpg

2022-09-24T17:28:26.504Z-PXL_20220922_143840782.jpg

2022-10-19T13:32:09.727Z-IMG_0069.jpg

$18.00

Out of Stock

Sign up to get notified when this product is back in stock!

Sold out since Nov 09, 2023

A Raspberry Pi hat to turn it into a JTAG programmer

This is a board which fits on top of a Raspberry Pi's 40pin GPIO and allows you to program CPLDs and FPGAs such as those from Xilinx and Altera with it, as well as many microcontrollers. It is compat…

Read More…

This is a board which fits on top of a Raspberry Pi's 40pin GPIO and allows you to program CPLDs and FPGAs such as those from Xilinx and Altera with it, as well as many microcontrollers.

It is compatible with xc3sprog, OpenOCD and UrJTAG. It should also work with any other JTAG utility that can use the Pi's GPIO.

It features the following:

Overcurrent protection
Onboard 3.3v regulator to optionally provide 3.3v to the target
Switchable 5v, 3.3v or target powered VCC
GPIO voltage translators that can work between 1.65v and 5.5v on the target side
Standard 6-pin JTAG layout for a cable or jumper wires
A 3x2 pin layout for Tag-Connect cables or this can also be used with jumper wires
Full colour instruction manual

It is compatible with current Raspberry Pis that have a 40pin GPIO. You will need at least a little familiarity with the Linux command line on the Raspberry Pi to install and use the software.

Raspberry Pi and mounting posts / screws not included.

Last photo is the pogo pin connector and cable so that you can program 2.54mm 6pin jtag boards with or without a header soldered on. This is an optional add-on.

No country selected, please select your country to see shipping options.

Change Destination Country:

Retro Supplies Shipping Policy:

All orders are normally shipped via Royal Mail Tracked 48 for UK and Royal Mail International Tracked from UK for other countries. It should be noted that orders from outside the UK may be liable for local customs and import duty fees prior to delivery.

Typical dispatch time is 1 working day, delivery times can vary depending on a number of factors. A tracking number will be provided.

Review Breakdown

5

1

4

0

3

0

2

0

1

0

Average Ratings

Product: (5.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Robert | Nov. 22, 2023

Great little programmer

I haven't really used it much but, it makes things a lot easier that's for sure! Great instructions and everything. Very happy with this item.

$18.00

Out of Stock

Sign up to get notified when this product is back in stock!

Sold out since Nov 09, 2023

Retro Supplies

Watton, Norfolk, United Kingdom

5 Reviews | 89 Orders

View Store

More From This Seller:

ROMulus flash ROM board for Amiga 500 / 2000

ROMulus flash ROM board for Amiga 500 / 2000

$55.00

Amiga 500 RGB to HDMI PCB

Amiga 500 RGB to HDMI PCB

$14.00

RAMesses II Amiga 2MB Chip RAM upgrade

RAMesses II Amiga 2MB Chip RAM upgrade

$130.00

Amiga 1000 CPLD RGBtoHDMI

Amiga 1000 CPLD RGBtoHDMI

$45.00

500 Enhanced CPU Relocator Amiga

500 Enhanced CPU Relocator Amiga

$30.00

500/200 2MB Chip Upgrade Amiga

500/200 2MB Chip Upgrade Amiga

$14.00

Amiga RGBtoHDMI Tester

Amiga RGBtoHDMI Tester

$82.00

RGBtoHDMI for Amiga 2000 PCB

RGBtoHDMI for Amiga 2000 PCB

$14.00

We thought you'd like these too…

DINPi RACK

$15.00

DINPi 90

$10.00

DINPi V2

$10.00

180 pHAT

$10.00

Sponsored Promotion

Cookies help us deliver our services. By using our services, you agree to our use of cookies. Learn more.