This is a PCB for version 2.0 of the Amiga 500 CPLD RGBtoHDMI.

The Amiga RGBtoHDMI takes the digital RGB signal from the Amiga's graphics chip (Denise) and uses a Raspberry Pi to output this via HDMI for a pixel-perfect image. The CPLD version calculates timings very differently to the traditional fixed logic boards, which means you do not need a Denise / Super Denise jumper and there is no "sparkling pixel" issue.

Since I released the original Amiga 500 CPLD RGBtoHDMI I have been taking feedback from users and builders and have implemented a lot of it into this new version. Functionally it pretty much the same as the 1.x boards but has the following changes:

• Footprints changed to make orientation / alignment easier
• All SMD components are on the top side
• Removed a couple of redundant components
• Added Pi Zero mounting holes
• Amiga 500 revision 3 motherboard support
• Shape changed slightly
• Credits on PCB use Topaz font :)

When purchasing you will receive just the PCB. The assembly instructions can be found on GitHub here where they will be updated as required. Other photos here are for demonstration purposes only.