LILYGO® T3S3 V1.0 ESP32-S3 LoRa SX1280 2.4G Development Board WiFi Bluetooth Wireless Module 0.96 Inch OLED Display Type-C
Designed by Lilygo in ChinaSign up to get notified when this product is back in stock!
This is LilyGo Team! Welcome to contact with us to discuss or ask about our products, glad to do business with you.
T3S3 V1.0 Introduction T3S3 V1.0 is a new version of the LoRa series (formerly LoRa32 series ), which carries the SX1280 LoRa module, supports the LoRa 2.4G frequency band, which supports global use…
Read More…
T3S3 V1.0 Introduction
T3S3 V1.0 is a new version of the LoRa series (formerly LoRa32 series ), which carries the SX1280 LoRa module, supports the LoRa 2.4G frequency band, which supports global use, and is also equipped with the ESP32 main control chip, which supports TF cards.
LILYGO® July 20, 2022
Github：https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series/tree/master/examples/RadioLibExamples/SX1280
What's in the box?
It is recommended to control the output power of the SX1280 chip between 2-5 dBm when using the SX1280 PA module, to ensure that the entire module outputs a power of 20 dBm. If the output power of the SX1280 chip is higher than 5 dBm, it will exceed the maximum allowable input for the FEM chip and cause damage. However, if the output power is lower than 2 dBm, the module's output power will still be within 20 dBm. Therefore, the output power setting of the SX1280 chip must be carefully controlled and not exceed 2-5 dBm to avoid damaging the FEM chip. Setting the output power to 3 dBm will ensure an output power of 20 dBm.
Sign up to get notified when this product is back in stock!
$16.95
$24.04
$2.16
$27.40
$16.83
$24.04
$4.80
$7.21
/i/56359/products/2023-01-09T08%3A32%3A01.182Z-H595%E4%B8%BB%E5%9B%BE-5.jpg?1673225609)
