The trigBoard is a Battery Powered IoT project that does one thing - it pushes you a notification triggered by a digital input.Designed by KD Circuits, Ships from United States of America
Well, it can do a lot more than just send push notifications, but that was the initial idea. Just another ESP8266 WiFi board? Let's see: LOW POWER! That's the special sauce right there. When id...Read More…
Well, it can do a lot more than just send push notifications, but that was the initial idea. Just another ESP8266 WiFi board? Let's see:
LOW POWER! That's the special sauce right there. When idle, it pulls less than 1uA... your smoke detector probably uses more power than this. But here's the best part, it wakes up via a dry contact type switch, connects to the WiFi network and sends you a push notification. But what if the switch is left open? if you're savvy with circuit design, you might be thinking thinking about pull-up/down resistor leakage. Well, the special pulse circuit on trigBoard does not use any resistors on the front-end, so it sleeps at the same <1uA current in either condition. Really cool!
Monitors every door in my house (garage too) with simple magnetic door sensors. I get an immediate notification on my phone using "Push Safer" when any of these doors opens.
Easy and small enough to mount in the mail box, which is surprisingly useful to know when the mail is delivered. I even have one monitoring the door bell.
And since it has an on-board 1hr timer, I actually use the board as a "throwie" for many projects. Basically, just use it to collect sensor data once an hour and report to the cloud, or even take a picture and upload it somewhere. The possibilities are endless, especially since you can run everything from a battery.
What if you left a door or lock open? Get a notification! Check this easy modification out: http://www.kevindarrah.com/wiki/index.php?title=TrigBoardStillOn
What's new for V7.0? The biggest feature is auto-reset!! now developing on the trigBoard is a piece of cake, meaning no more messing with the GPIO0 and RESET buttons to get it into programming mode. Now, you just need to wake the board up and press upload from the Arduino IDE, and your good to go. It really is an awesome feature. Check out the wiki for everything else.
Each board tested and pre-loaded with firmware - can be re-programmed, or use as-is with the default loaded code. Programming the board has been verified and highly tested using my FTDI USB-Serial Converter. I highly recommend this if you're planning on developing your own projects with the trigBoard: https://www.tindie.com/products/13817/
Note - does not come with battery or sensors - see wiki for details: http://www.kevindarrah.com/wiki/index.php?title=TrigBoard
|Shipping Rate||First item||Additional items|
United States Postal Service: First Class - Bubble Mailer
John | Jan. 17, 2019
Dennis | Jan. 17, 2019
James | Jan. 14, 2019
John | Oct. 30, 2018
James | Oct. 28, 2018
$15.00 $ $15.00
$5.00 $ $5.00
$10.00 $ $10.00
$10.00 $ $10.00
$7.00 $ $7.00
$17.95 $ $17.95
$33.00 $ $33.00
$19.95 $ $19.95
$14.95 $ $14.95
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
My name is Kevin Darrah and I have a design services company called KD Circuits http://www.kdcircuits.com
One of my passions is teaching electronics on YouTube: https://www.youtube.com/user/kdarrah1234
A lot of the projects and concepts I talk about in those videos are based on my own designs, which is why I'm here on Tindie to make them available for sale.
Thanks for stopping by!