CC1101 Module for Flipper Zero - Sub-GHz PCB Board Range Extender with GPIO Connector in 3D Printed Enclosure 315MHz 433MHz 868MHz 915MHz

If you're looking for a fully customized, compatible external CC1101 module for your Flipper Zero because its internal CC1101 antenna isn't powerful enough, you've come to the right place.

The module is manufactured and assembled with the highest quality and care.

Do you use a silicone case with your Flipper Zero? Don't worry, you can connect it without removing it.

Plus, you can now choose the product color!

Features:

• CC1101 board mounted on 5V-powered circuitry to avoid interference from the 3.3V port and ensure a cleaner, noise-free signal.

• 3dBi antenna

• Longer connection pins for connecting the module without removing the silicone case.

• Green LED indicates whether the module is powered on (receiving power)

• The CC1101 can operate at any frequency within the 300-348 MHz, 387-464 MHz, and 779-928 MHz bands. This includes the ICM band, which is license-free (check your country's regulations regarding the use of permitted frequency bands).

Tested firmwares:

• Momentum --> https://momentum-fw.dev/
• Unleashed --> https://flipperunleashed.com/
• Roguemaster --> https://rogue-master.net/
• Xtreme (no longer maintained) --> https://flipper-xtre.me/

Before you buy:

• Colors may vary slightly (difference in tone between the photo and the actual product)

• ATTENTION! If your shipping address is not in Spain, you may be subject to import duties and/or customs fees, which are NOT covered by the purchase price in most cases (unless Etsy indicates otherwise during the checkout process)

• THE PURCHASE DOES NOT INCLUDE THE FLIPPER ZERO SHOWN IN THE PHOTO.

• Remember that this item is for legal use on your own device and for educational purpose only.