The Arduino-compatible, customisable keyboard.Designed by JacoBurge Electronics, Ships from United Kingdom
What is it? TouchPad is a fully customisable USB keyboard designed for storing and producing keyboard shortcuts in a clean and user friendly manner. This allows you to map functions in any program...Read More…
TouchPad is a fully customisable USB keyboard designed for storing and producing keyboard shortcuts in a clean and user friendly manner. This allows you to map functions in any program to TouchPad's keys, speeding up your workflow. TouchPad can be used with programs ranging from word processing to advanced design software. TouchPad allows key customisation by hand or digitally, and uses a text editor based programmer for quick shortcut setup.
TouchPad's 36 capacitive keys can each be assigned a series of five key presses using the built-in programming mode. Alternatively, users familiar with Arduino can combine keyboard, mouse, MIDI or serial functions using the Arduino IDE.
What sets TouchPad apart from other macro keyboard solutions is the ability to quickly customise the keys to suit the task at hand. Combining capacitive touch with haptic feedback produces the feel of a mechanical keyboard but on a flat surface, allowing the use of our unique overlay system. Transparent overlays can be quickly swapped to match the current command set. TouchPad has five command sets, enabling a total of 180 customisable functions that you can tailor to five different applications.
Designed for Portability and Compatibility
TouchPad's light and slim design means it can be taken anywhere (TouchPad is a bare PCB so it is advised to transport it with care). The lack of need for specific drivers or software, in combination with its compatibility across Windows, Mac and Linux, makes it a flexible tool for any application. TouchPad's light and slim design means it can be taken anywhere (TouchPad is a bare PCB so it is advised to transport it with care). The lack of need for specific drivers or software, in combination with its compatibility across Windows, Mac and Linux, makes it a flexible tool for any application. Your customised setup is stored within TouchPad. This means TouchPad operates the same wherever you go, whatever device you are using.
Customisable and Versatile
Quickly switch between applications by swapping the transparent overlays. Overlays are customisable in the following ways:
Custom overlays can easily be aligned to TouchPad's keys using the location posts. The location posts are separated to conform with the ISO-838 size of standard hole-punches. The location posts can be adjusted to ensure perfect alignment of custom overlays.
Whether you choose to draw your overlays or design them digitally, the process is quick and straightforward. Designing digitally consists of four steps: design, print, cut and hole-punch. One overlay designates 36 keys at once without the need to label keys individually and make permanent aesthetic changes to your keyboard. Blank overlays can be cleaned and reused using permanent marker remover. If you need more blank overlays than are provided, print the blank template onto transparency film, cut and hole-punch.
Sleek Industrial Design
TouchPad's unique design belongs on everyone's desk. Four rubber feet keep TouchPad in place during use.
TouchPad does not require any special software or drivers to enable the basic functionality. The basic functionality allows up to 5 key presses to be assigned to each key including letters, numbers, symbols and modifiers, great for keyboard shortcuts. Several delay and repeat functions are also available (1mS, 10mS, 100mS, 1s, 5s, 10s and 2x, 3x, 4x, 5x, 10x, 20x). You can also program TouchPads key LEDs (except the bottom row which is predefined) to a pattern matching your command set, this will be displayed when you switch command set.
Using the portable On The Go programming mode involves opening any basic text editor, touching and swiping on TouchPad, and interacting with the user interface typed out by TouchPad. The On The Go programming mode has many advantages:
TouchPad is integrated with the Arduino development environment, meaning you can easily edit the Open-Source firmware and upload it to TouchPad. This allows you to assign snippets of code to each key, giving you the ability to assign longer key sequences or other functionality to keys.
Using the Arduino IDE add keyboard, mouse, MIDI, serial or any other Arduino (32u4) compatible function to any key.
Arduino is easy to use software, with the setup process documented in the user manual and all necessary files provided.
|Shipping Rate||First item||Additional items|
Royal Mail: International Standard (3-5 days)
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
My name is Jacob and I am an electronic hobbyist and student of Electronic Engineering at the University of Southampton. I have a passion for electronic engineering which I have expressed through a variety of projects over the past 7+ years. These projects vary from mechatronic robots to quirky clocks, and huge arrays of LEDs, check them out here: https://jacoburge.co.uk/.