The ESP12.OLED_V1 development board is a programming-ready IoT controller with graphic display and interfaces for sensors and actuators.Designed by IoT-devices, LLC in Ukraine
October 2023: Despite Russia's aggression and war against Ukraine, our company works and delivers orders to customers all over the world
Description The ESP12.OLED_V1 development board is a programming-ready IoT controller with graphic display and interfaces for connecting digital and analog sensors and actuators. It is used as a cent…Read More…
The ESP12.OLED_V1 development board is a programming-ready IoT controller with graphic display and interfaces for connecting digital and analog sensors and actuators. It is used as a central module of IoT devices.
The development board has:
PCB holes for GPIO pin-headers with step 2.54 mm
onboard SSD1306 128x64 monochrome 0.96" OLED I2C display
UART interface connection for testing and programming via terminal console.
The ESP12.OLED_V1 development board can be easily integrated into any 3rd - party systems with a power level of 3.3 or 5 Volts and with a logic level of 3.3 Volt.
The board has a built-in 3.3 Volt regulator. 4.5 to 6 Volt (5.6V maximum recommended). DC input power is supplied via micro-USB connector or VCC and GND.
The ESP8266-12E (F) module has the specifications provided by AI-Thinker.
All ports (I/O pins) of ESP8266-12E (F) are soldered out. GPIO headers of the development board are supplied separately. The step between the headers is 2.54 mm. The pin placement sequence is the same as the pin placement sequence on the ESP826612E (F).
Demonstration software (IoT-devices Test Tools) is pre-loaded on the ESP8266 module to quick-test and demonstrate main technical functionality of the board. This software starts in 10 seconds after power is applied.
User Manual on this software is available in a separate document. See link.
Specifications and properties:
MCU properties comply with ESP-12F Datasheet.
To program the controller, connect ESP12.OLED_V1 via the UART connector to your computer using a UART-USB interface converter on the CP2102 chip or similar.
Average current consumption of the controller without connecting additional devices and active Wi-Fi is about 80mA. In Deep Sleep mode average current consumption - 10uA
Current consumption with deactivated Wi-Fi no more than 10 mA.
The maximum load level on the 3V3 board output for external elements of the system is 500 mA.
Install j1 to activate "Deep Sleep Wake Up Circuit".
Power supply mode selection:
install X5 jumper for 5v power supply via uUSB or X6 pin;
else uninstall X5 jumper to select 3v3 power supply via X6 pin.
Dimensions 30x65x10 mm.
Comparison of ESP12.OLED_V1 development board and NodeMCU classic board
|ESP12.OLED_V1||NodeMCU classic board|
|Power Input Voltage Selector||5V or 3V3 via jumper||None, 5V only|
|UART interface||Present, Tx/Rx pin-headers||Present, Tx/Rx pin-headers or via micro-USB|
|Micro-USB interface||Power only||Power and Data|
|Deep Sleep Wake Up Circuit||Ready-to-use, via jumper||None, manual wiring|
|RGB LED||Built-in, via 3 x GPIO||None|
|ADC Voltage Divider & port||Built-in, up to 5.6V DC input||None, port only|
|Fixed I2C bus pins||Yes, GPIO5 SCL, GPIO4 SDA||Not determined|
|Full pin-map soldered out||pin-headers supplied||pin-headers soldered|
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when ESP12.OLED - universal ESP8266+0.96"OLED MCU board can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!