With this drop-in board you can make your genuine SNES controller wireless and use it with our receiversDesigned by insideGadgets in Australia
Please allow for some delays due to COVID-19. AusPost tracked shipments may experience an additional 2-3 weeks delay.
This product is build to order, usually within 2-5 days 14 May 2020 – Out of stock, waiting for more wireless modules As an extension to the Wireless Gameboy/GBA Controller project in which we can ...Read More…
This product is build to order, usually within 2-5 days
14 May 2020 – Out of stock, waiting for more wireless modules
As an extension to the Wireless Gameboy/GBA Controller project in which we can re-use the receivers available so you can mod your SNES controllers with a board to make them into a Wireless Game Controller. You will need a board and receiver as a minimum to get started.
The board only suits the genuine SNES controller, take a look at the installation guide to confirm yours matches. You could use a 700mAh from AliExpress which should last about 40-50 hours of game play, it is a bit too thick at 7.5mm so some of the direction keys may need to be pressed a bit harder. Any battery with a similar size should do, just make sure it’s under 7mm thick.
Transmitted keys: All but it depends on the receiver as to which keys are actually used. There are some special button mappings available – check the receivers page. Refresh rate: Every 2ms, the keys are checked and a packet is transmitted to the receiver.
This is a DIY part, you’ll need to make some modifications to your controller plus you will need to solder your LiPo battery leads to the board. Check out the installation instructions for further details.
We usually ship within 2-4 business days and have different shipping methods available – the lowest cost method is $3 and usual delivery time is 2 to 4 weeks.
You will need a board and receiver as a minimum to get started. If you have a receiver already from the Wireless Gameboy/GBA Controller project, you will need to update the firmware.
You can have multiple receivers per transmitter and you can use the same receiver for different wireless controllers. Any receivers/transmitters you purchase will be paired together. If you are unsure about your use case, please send us a quick email to email@example.com.
To prevent double listing of receivers, you should purchase receivers from the Wireless Gameboy Controller page.
Please note that there is no encryption or security available for these devices, while this should pose no issue for home users, it would be possible for an attacker to potentially take over your controls or block your control.
Disclaimer: We shall not be held liable to and shall not accept any liability, obligation or responsibility whatsoever for any loss or damage that may occur by using this product directly or indirectly.
|Shipping Rate||Ships From||First item||Additional items|
Australia Post: Tracked Parcel
2-4 weeks delivery time
DHL: Tracked Parcel
2-4 working days delivery time after order completed notification. No PO Boxes allowed. Please make sure someone at the address can sign for the package. Please add your phone number into the notes.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!