With this drop-in board you can make your generic NES controller wireless and use it with our receiversDesigned by insideGadgets, Ships from Australia
This product is build to order, usually within 1-3 days A compliment to the Wireless Gameboy/GBA Controller project in which we can re-use the receivers available (firmware update required if you...Read More…
This product is build to order, usually within 1-3 days
A compliment to the Wireless Gameboy/GBA Controller project in which we can re-use the receivers available (firmware update required if you purchased one before 1st May 2019) so you can mod your NES controllers with a board to make them into a Wireless Game Controller. You will need a board and receiver as a minimum to get started.
This board only suits a generic NES controller purchased from Ebay, etc, take a look at the installation guide to confirm yours matches. There isn’t much room in the controller so the LiPo I have in mind is 200mAh 3mm thick from AliExpress and should last about 13 hours of game play.
Transmitted keys: All Refresh rate: Every 2ms, the keys are checked and a packet is transmitted to the receiver.
This is a DIY part, you’ll need to make some modifications to your controller plus you will need to solder your LiPo battery leads to the board. Check out the installation instructions for further details.
We usually ship within 2-4 business days and have different shipping methods available – the lowest cost method is $3 and usual delivery time is 2 to 4 weeks.
You will need a board and receiver as a minimum to get started. If you have a receiver already from the Wireless Gameboy/GBA Controller project, you will need to update the firmware.
You can have multiple receivers per transmitter and you can use the same receiver for different wireless controllers. Any receivers/transmitters you purchase will be paired together. If you are unsure about your use case, please send us a quick email to firstname.lastname@example.org.
To prevent double listing of receivers, you should purchase receivers from the Wireless Gameboy Controller page.
Please note that there is no encryption or security available for these devices, while this should pose no issue for home users, it would be possible for an attacker to potentially take over your controls or block your control.
Disclaimer: We shall not be held liable to and shall not accept any liability, obligation or responsibility whatsoever for any loss or damage that may occur by using this product directly or indirectly.
|Shipping Rate||First item||Additional items|
Australia Post: Airmail Letter (no tracking)
DHL: Tracked Parcel
2-4 working days delivery time after order completed notification. No PO Boxes allowed. Please make sure someone at the address can sign for the package. Please add your phone number into the notes.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!