Recommended Products

PRODUCT DETAILS

The newly designed 6WD mobile platform uses a 2mm aluminum alloy for one-time stamping and the surface is then sprayed. 6 high-speed DC motors (original 17000 rpm), combined with 1:34 full metal gearbox, enable the car to obtain strong off-road performance.

The shock absorption design is the highlight of the car. The six hydraulic spring dampers are used to securely connect the motor to the upper body, which gives the platform a better road penetration capability, especially for some complex bumpy roads.

The 6WD mobile platform can be installed with different types of control boards or controllers, such as Arduino or Raspberry Pi. The upper chassis uses a 3mm mounting hole, and the horizontal 12mm, vertical 14mm hole spacing can be installed in a wide variety of sensors, or additional features such as the installation of a robot. The upper base plate reserves the mounting holes of the Arduino platform and the Raspberry Pi platform.

Performance

• Vehicle size: 282111.5cm
• Vehicle quality: 1.4kg
• Maximum load: 6kg
• Working voltage: 12V
• Rated current: 350mA*6
• Motor original speed: 17000rpm
• Output shaft speed: 500rpm
• Rated torque: 5kg/cm

Part List

• 2 x Chassis
• 3 x U-shaped bracket
• 3 x U-shaped shock absorber bracket
• 6 x Motor bracket
• 6 x Shock absorber
• 6 x JGA25-370 motor
• 6 x 18-4MM coupling
• 6 x wheel
• 8 x Copper column
• 12 x Flange bearing
• 6 x Spring
• 1 x switch
• 2 x AWG wire
• 10 x Cable tie
• 1 x Cross sleeve
• 6 x M2.5 * 14mm
• 6 x M2.5 * 16mm
• 12 x M2.5 locknut
• 28 x M3 * 6mm
• 24 x M3 * 10mm
• 24 x M3 locknut