Four analog CV outputs, Twelve gate outputs, a wide range of MIDI to CV mapping options at a budget price!Designed by Sixty Four Pixels in United Kingdom
CV.OCD is a device which converts MIDI signals to the Control Voltage (CV) and Trigger/Gate signals which are used to control traditional analog synthesizers. As well as doing this useful bit of “p...Read More…
CV.OCD is a device which converts MIDI signals to the Control Voltage (CV) and Trigger/Gate signals which are used to control traditional analog synthesizers.
As well as doing this useful bit of “plumbing”, CV.OCD is designed to open up some creative options that go beyond what a simple MIDI-CV converter can usually do.
CV.OCD has four assignable “continuous” analog CV outputs and twelve assignable gate/trigger outputs
It has powerful functionality for generating clock, trigger and non-note gates from MIDI information. For controlling your analog equipment via MIDI you are probably not going to get as much bang for your buck with anything else!
Each of the FOUR analog CV outputs have 0-8V output level and 12-bit resolution and be assigned to any of
Each of the TWELVE gate outputs has 5V output level (Please ensure that this is a high enough voltage level to trigger your synthesizer) and can be assigned to any of
A Gate Boost utility is available to allow the CV.OCD to trigger synths with higher voltage V-Trig requirements.
CV.OCD allows to group pitch and gate outputs to achieve configurations like
You get 12 gate outputs to play with! As well as simply gating notes you can
The device is configured by MIDI system exclusive patches, which you can create using a web based configuration page. Onces installed on the device, the patch is saved during power cycles.
Future firmware upgrades to the device can simply be installed over MIDI as sysex files.
CV.OCD has a standard 5-pin DIN MIDI input with optical isolation. There is also a 3.5mm stereo jack MIDI input which is compatible with Novation, Arturia and other devices which use a "hot tip" configuration (For Korg devices you need to use the 5-pin input). Only one of the MIDI inputs may be used at a time.
Power is 9-12V DC via a 2.1mm barrel plug with negative centre pin (This is the type of supply used with most guitar stompboxes). Use a supply with 100mA (0.1amp) or more current capacity (It does not matter if the current capacity of the supply is higher). The supply must have a DC output - do not use an AC output power adaptor.
The supplies which I am re-selling as a product option are quality "wall wart" style supplies from myVolts.com. More information on these supplies is available on myVolts web site
The device comes FULLY ASSEMBLED and tested. Size approx 17.6cm x 5.5cm x 2.7cm. Approx weight 175g. Laser cut acrylic case
Designed and hand assembled in Brighton, UK
Click below to see a nice review by Enrique Martinez
|Shipping Rate||Ships From||First item||Additional items|
Royal Mail: Air Mail Standard (Not Trackable) [LD]
DHL: DHL Express Courier (Any order size)
Express courier service with online tracking. Recipient pays any necessary import fees. Total shipping cost is for any size of order - additional items are free!
Daniel | Dec. 5, 2018
Øystein | Nov. 16, 2018
Matthew | Sept. 13, 2018
Yannick | July 17, 2018
Alan | June 11, 2018
Emilio | June 11, 2018
Christian | June 11, 2018
Alan | Jan. 7, 2018
Patrick | Dec. 28, 2017
Nathan | Nov. 14, 2017
Mark | Oct. 27, 2017
Joe | May 6, 2017
Brent | April 28, 2017
Mike | April 9, 2017
Graham | March 10, 2017
Luke | Feb. 28, 2017
David | Nov. 25, 2016
Jerome | Nov. 12, 2016
Marpot | Nov. 12, 2016
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!