ESP8266 WIFI Vibration Sensor detects vibrations and sends them to a selectable IP address and TCP portDesigned by Snaptekk, Ships from Canada
This product is no longer available for sale. The seller may be offering an improved version or it may be hanging out on the beach, enjoying the retired life.
All things connected. Affordable IoT sensors and prototyping modules. WiFi Relay control. WiFi Sensors: Temperature, Humidity, Gas, Color, Vibration, Movement, etc
WE CAN CUSTOMIZE THE FIRMWARE TO MODIFY THE BEHAVIOR ACCORDING TO YOUR NEEDS, INCLUDING SUPPORTING PROTOCOLS LIKE MQTT, CONTACT US FOR PRICING AND DETAILS ESP8266 based WIFI Vibration Sensor. It d...Read More…
WE CAN CUSTOMIZE THE FIRMWARE TO MODIFY THE BEHAVIOR ACCORDING TO YOUR NEEDS, INCLUDING SUPPORTING PROTOCOLS LIKE MQTT, CONTACT US FOR PRICING AND DETAILS
ESP8266 based WIFI Vibration Sensor. It detects vibrations and sends a signal via WIFI to a selectable IP address and port number via TCP protocol. The board can be configured via a web browser to connect to your wireless router. The board can be connected to a serial interface for debugging or reprogramming of the ESP8266, and comes with TX-RX connectors, reset and flash switches, making it flexible for experimenting and prototyping. Setting up the board:
• Connect the 5V power • Press board reset button 3 times • From your computer, check available wireless networks and connect to a network which name has the form ESP_STATION_xxxxxxx • When prompted, enter the password to the ESP_STATION. The preset password is ‘espadmin’ • Wait until your computer successfully connects to ESP_STATION_xxxxxxx • In your browser enter a string of the form: http://192.168.4.1/?SSID=Your_wifi_SSID&Password=Your_wifi_password&Server=Listening_server_address&Port=Listening_server_port and press return. For example: http://192.168.4.1/?SSID=ATT994&Password=bluefish&Server=192.168.1.73&Port=9999
Wait a few seconds and the board should be all setup, connected to your wifi network and on stand by to send events when movement is detected by the sensor. On the receiving side, you will be receiving events on the Listening_server_address you selected and entered. The events will come on Listening_server_port, so all you have to do is listening on that port. The events received have the form: Vibration detected from IP xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the ESP8266 WIFI Vibration Sensor board.
Note that there are 2 models, ESP8266-03VS01 with a larger sensor and ESP8266-03VSS01 with a smaller sensor and extension cable.
William | Aug. 21, 2016
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!