Pre-Filtered ADS-B LNA 1090 MHz; 25 dB Gain; with ESD protection + Bias Tee; Low Noise AmplifierDesigned by GPIO Labs in Canada
PRODUCT OVERVIEW This is a small, Pre-Filtered ADS-B Low Noise Amplifier centered at 1090 MHz with a typical gain of 25 dB in the pass band and Noise Figure of 1 dB. This product has excellent out-...Read More…
This is a small, Pre-Filtered ADS-B Low Noise Amplifier centered at 1090 MHz with a typical gain of 25 dB in the pass band and Noise Figure of 1 dB. This product has excellent out-of-band rejection specifications, provides power handling of up to a maximum -15 dBm and has an operating temperature range of -40C to +85C. Additionally, it has a built-in Bias Tee and front-end ESD protection.
Please note the following precaution since the Bias Tee is installed. When powering the device using either the DC header or the USB connector, +5 VDC will appear on the RF output. If your receiver does not have a DC blocking capacitor on its input or some other form of DC voltage protection, this voltage WILL damage your receiver.
1090 +/- 15 MHz
Frequency ........... Gain
700 MHz ......... 5 dB
800 MHz ......... 0 dB
900 MHz ......... -3 dB
1090 MHz ......... 25 dB
1150 MHz ......... -20 dB
1200 MHz ......... -7 dB
The filter uses SMA-F connectors
Built-in Bias Tee and ESD protection
Bias Tee requires at least +3.3V to operate and a maximum of +12V
Max RF Input = -15 dBm
|Shipping Rate||Ships From||First item||Additional items|
United States Postal Service: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!