2.4 GHz RC Controller with Atmega328PDesigned by Saturn Technologies in Italy
FULL DOCUMENTATION AND PINOUT ON REQUEST SOLD OUT! PLEASE EMAIL TO PRODUCE ANOTHER BATCH October promotion: -5$ each Need another design? - If you need another design, or a different configuration of…Read More…
FULL DOCUMENTATION AND PINOUT ON REQUEST
October promotion: -5$ each
Need another design? - If you need another design, or a different configuration of characteristics on the board you can just ask, we are available for custom work. We build this for you, and we are ready to perform any change to meet your needs.
What is it? - This 2.4GHz controller is based on Atmega328P and uses NRF24L01 (by default with PA + LNA) to transmit at 200+ meters range (tested). - It uses 2 analog sticks (pinout Dollatek's HW-504) and 5 buttons (contacts) as input. - It needs 7.4V LiPo in order to operate for 2 hours, then as no charge detector is included is suggested to test/recharge your batteris (you can safely recharge lipos even if they aren't totally discharged). - It has an extendable hardware, meaning that the user can request a custom configuration. By default comes with x1 serial port, x1 SPI port (not programming, NRF24L01 pinout), x2 I2C ports (non standard pinout). - You can use it to provide 5V or 3.3V stabilized to any other device as it comes by default with AMS1117 voltage regulators. - Some components are installed manually, the rest is built in a pcb manufacturing facility (JLCPCB). - All components are built from realiable sources (Mouser, DigiKey, LCSC).
How does it work? - The device uses 6 bytes to send instruction to a receiver. If using another NRF24L01, correct packet exchange is guaranteed. These bytes will be specified by the user when buying the product. - All 6 bytes can be used to send both digital signals (from 5 contacts) or analog signals (from 2 analog sticks).
What are the default parameters? - The board uses low power consumption and works at 250KBPS on fixed channel #34. You can request a change for this parameters. However, the device is not tested at speed different from 250KBPS. - Its RADIO_ID is fixed at #1 by default. You can request a change for this parameter.
Shipping informations - The product will be manufactured and programmed only before you place an order, this means there could be an extra time before the shipping. - Free shipping to EU for 2+ items. - Free shipping to Australia for 4+ items. - Free shipping worldwide for 6+ items.
What will I get? - From now on, you will get the newer version of the controller (photo to be updated as its produced):
Current status - Finalizing PCB layout, preparing to manufacture the board.
Because of the large amount of work ed are doing on out newer boards and the large number of custom works we are pushing forward, this specific board Will be manufactured only upon pre-order. Please email me if you are interested, i Will produce It immediately!
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when 2.4 GHz RC Controller can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Shipping from Italy to Europe: 11,90 € for packages less than 0,5 kg. Ships in 2-3 businness days.
Shipping from Enfield, NSW to Australia: 10,00 USD. Ships in 24 hours.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!