This tracking device was originally developed for find lost quadcopters/multicopter/plane RC models, however it may also be used for otherDesigned by ExpertRC in Russia
This is ExpertRC Beacon PRO pack include: 1x UHF Beacon with Spring Antenna 1x UHF Beacon with Wire Antenna 1x MicroUSB Charger for LIR2032 battery 3x LIR2032 battery 1x USB Uart TTL Adapter Ca...Read More…
This is ExpertRC Beacon PRO pack include:
3x LIR2032 battery
1x USB Uart TTL Adapter Cable for programming (optional)
3x cables for connecting (optional)
1x DIY Case Small 50x28mm (need drill hole for antenna)(optional)
If you need another antenna or something else, please contact first.
This tracking device was originally developed for find lost quadcopters/multicopter/plane RC models, however it may also be used for other applications such as pets, birds, falconry, peoples, Cars, balloons, wild animals and many others.
It small but powerful- you'll hear your beacon up to 10-15 km in the air, and few kilometers on the ground via regular portable UHF radio/Walkie Talkie w stock antenna.
Quick video demo https://youtu.be/1PBSFgBe2i0
It highly customizable- you can change almost anything in serial menu setting.
Delay start function accept any RC or FPV control/video band and not affected to 433MHz also.
Current consumption in sleep - 0.02 mA (depending on operating conditions)
Weight: ~6.3 grams (w battery) 3.6 grams- no battery
Dimensions~ 22 x 38 x 8 mm
To configure setting of beacon you need:
Plug to USB port and install drivers for cp2102 if needed Open serial terminal programme (Putty or else ) and connect to you COM port and 9600 speed, you will se "HOLD M for menu"
Press and hold (up to 1 minutes depend of TX delay settings) BIG "M" and wait for mark
"Press ENTER to menu"
Then press Enter you will see menu
To change setting you need enter register №, press "Enter" ,then enter value and press "Enter".
after setting you can press ENTER twice and Beacon rebooting with new setting
You can reset all setting except Factory Calibrate by setting pin SET to GND and power up.
PLEASE PUT "+" battery to "+" mark of charger, otherwise battery can break down.
RED LED- Charging / BLUE LED- end charging or no battery.
Charging time up to 2 hours.
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Micro 433 RF UHF Beacon tracker for lost RC models can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!