Current Monitoring Controller 1-Channel 70-Amp 97%Designed by everything, Ships from United States of America
High Accuracy Current monitoring (resistive load) Current Monitoring for Particle Photon WiFi Cloud 1-Channel Input with 0 to 70 Amp Input Range Solid Core Current Sensor with 3% Max Error Rate I²...Read More…
using this product its possible to monitor your energy uses really easy. this product is really easy to setup and with wifi connectivity you can see on your phone. Within a month this product could pay for itself.
Its a low cost energy monitoring solution. Its very high accurate. Current monitoring of your AC power load is now possible from anywhere in the world using the Particle Photon WiFi cloud communications module. Monitor current in the most remote locations and keep track of your power consumption from a smartphone or web browser using our FREE Mobicle application. This controller has one 70-Amp current monitoring channel, precision tuned to monitor the current flow through the on-board current sensor with a 3% maximum error rate (Tested up to 70 Amps). To use this device, simply run an AC power wire, up to 10mm in size, through the center of the sensor. The on-board custom designed CPU will do the rest using I²C communications to the Particle Photon. This controller includes an I²C expansion port, allowing expansion for more current monitoring inputs or other types of I²C sensors and devices. Four on-board address jumpers allow expansion of up to 16 current monitoring devices through the I²C expansion port. Mix and match current monitoring controllers of any size to meet your specific application requirements.
Monitor current on the go with NO PROGRAMMING using our open-source Mobicle application, designed to work from your ControlEverything.com user account through your web browser. Software developers can take advantage of our ControlEverythingCom GitHub repository for current monitoring and programming samples. This device only requires a 12VDC power supply for operation, which may be plugged into the controller using a 2.1mm center positive barrel connector or on-board terminal block for direct wired power supplies. Particle Photon not included.
This device is tuned for reading current in the 0 to 70-Amp range. Exceeding 70 Amps through the core sensor may damage the on-board CPU. For best accuracy, we highly recommend choosing a controller with the lowest possible amperage rating required for your application. This device is designed for AC current measurement only and cannot be used to monitor DC loads. This device is typically more accurate than commercially available clamp meters and nearly as accurate as most direct wired meters. This device will arrive pre-set to calibration values known to work well in our master designs for resistive loads, recalibration will be required for inductive loads. Each channel may be individually calibrated. All current monitoring controllers require half of a second to analyze and compute a current monitoring result for all channels. For best performance, we suggest communications with this device no more than once per second. Note: it doesn't come with photon. need to order separately.
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!