About this module

This 12HP Eurorack module provides four separate LFO's, which each can deliver three different waveforms. Each LFO can output both a square, triangle and sine wave. The frequency of each LFO can be altered by twisting each of the corresponding knobs. While each of the four LFO's is similar in terms of design, they do operate on different frequency scales. The top LFO being the fastest and operates roughly at wavelengths between 0.1 and 5 seconds. The bottom one is the slowest and can generate wavelengths of up to 10 minutes, lending itself perfectly for the creation of slow emerging soundscapes. Due to the availability of these four distinct LFO's, this module is a great addition to almost every Eurorack setup.

Building this module

If you order the "Panel + PCB" option you will receive both a SMD populated PCB and an aluminium panel. You will only need to solder the following (non-included) components onto the PCB to complete the module:

• 4x ICL8038
• 12x (Thonkiconn) 3.5mm audio jack
• 4x 100k potentiometer
• 1x 2x5 IDC connector

About Cosmic Instruments

Cosmic Instruments started off as a synth DIY hobby project and mostly consisted of hand-soldered protoboard modules and hand-drawn front panels. At some point my setup required more robust and reliable modules. I converted many of my modules to PCB designs and also started making professional designs for the front panels. Now, after many iterations of my designs, I feel that my modules are ready be used by other people around the world. Tindie seemed to be the right place to start...