About this module

This Envelope Generator gives you four separate Attack Release Evelopes. Each of these can be triggered using the 'gate' input and outputs the envelope via the 'out' output. The Attack knob can be used to control the speed at which the envelope's signal rises. The release knob on other hand control the speed at which the signal decreases. The envelope can be used to control anything that is voltage controlable, like for instance the threshold of a filter, or the amplification of a VCA. Both the Attack and Release can be extremely short (i.e. instant) or multiple seconds long.

The fact that this module does not have just one or two envelope generators can come in very handy. I usually use it to control multiple different modules that alter a certain sound. For example, the module can control both a VCA, VCF and Wave Folder that all alter the same sound. As all envelopes can have different Attack and Release speeds, this can create multiple layers of interesting changes that happen to the sound.

In one of my demo's I use this module to control a VCA, which controls the amplification of a square wave. The video can be found here: https://www.youtube.com/watch?v=2WJbQAJRJ_Y

Do you have questions about the module? Feel free to send me a message :)

Width: 12HP (60.6mm) Height: 3U (128mm) Depth: 30mm Aluminium panel with awesome graphics! Active module, so power cable required Power consumption (+12V): TBA mA Power consumption (-12V): TBA mA Power consumption (+5V): 0mA

About Cosmic Instruments

Cosmic Instruments started off as a synth DIY hobby project and mostly consisted of hand-soldered protoboard modules and hand-drawn front panels. At some point my setup required more robust and reliable modules. I converted many of my modules to PCB designs and also started making professional designs for the front panels. Now, after many iterations of my designs, I feel that my modules are ready be used by other people around the world.