RadSens 2 – compact arduino dosimeter with I2C interface and replaceable Geiger-Muller counter (tube)Designed by ClimateGuard in Kazakhstan
What is it? The RadSens 2 is an universal module dosimeter-radiometer based on the tried and tested gas-discharge Geiger-Muller counter SBM 20. SMB20 tube included in delivery set. Dosimetr board sup…Read More…
The RadSens 2 is an universal module dosimeter-radiometer based on the tried and tested gas-discharge Geiger-Muller counter SBM 20. SMB20 tube included in delivery set. Dosimetr board supports different gas-discharge Geiger-Muller counters (like J305,M4011, STS-5 or others). The logic of the RadSens is based on the STM32 microcontroller. The data received from the Geiger counter is transmitted via the I2C interface. The device supports changing in the I2C address and turning off the high voltage generator (400V) to reduce power consumption. Fine-tuning of the counter sensitivity is supported.
1. Ready to use
Dosimeter is tuned and SMB20 counter is included in delivery set. So you can use module from the box.
2. Measures three parameters
As an outbound I2C package, the RadSens board generates 3 values:
3. Ready to use libraries, datasheet and friendly community
The radiation sensor based on RadSens board can work both in standalone mode and as part of an external Arduino, STM, Raspberry microcontroller or as part of your own device. To run the board you can use the sketch example or our libraries on GITHUB. Also you can join our community in Telegram: ClimateGuard_Community
4. Build-in led
Measuring background radiation in a standalone mode represents the radiation level by flashing the LED. With an increase in radiation, the blinking frequency will increase proportionally and vice versa.
5. Easy counter mount and unmount any counter
Tube (Geiger-Muller counter) could be mount on a special holders or soldered directly through holes in the board
6. Board support different counters
Supported Geiger-Muller counters: any with anode voltage 380 – 440 volts. Including but not limited to SBM20, J305,M4011, STS-5. Geiger-Muller counter not included in delivery set.
|Geiger–Muller tube||SBM 20|
|Supported radiation range, μR / h||14,4 ... 144 000,0|
|Own background noise, no more, imp / s||1|
|Sensitivity to gamma radiation (37 Cs source), imp / μR||160 … 75|
|SSpread of relative sensitivity||15%|
|Supply voltage, V||3,0 ... 3,5|
|I2C frequency, kHz||400|
|Radiation LED indication||yes|
|Operating temperature range, °C||-20 ... +60|
|Dimensions, mm||89 х 21 х 16|
|Device weight (approx), g||12|
|1||VCC||Supply voltage 3.0 V ... 3.5 V|
|2||GND||Ground (common wire)|
|3||SCL||I2C serial clock line|
|4||SDA||I2C serial data line|
No country selected, please select your country to see shipping options.
No rates are available for shipping to .
Enter your email address if you'd like to be notified when Dosimeter with I2C (RadSens 2) Arduino can be shipped to you:
Thanks! We'll let you know when the seller adds shipping rates for your country.
|Shipping Rate||Tracked||Ships From||First Item||Additional Items|
Ken | Sept. 27, 2022
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!