Turn your Teensy 4.0 into a WIFI/Bluetooth/2.4Ghz POWERHOUSE, compatible with Arduino UNO R3 shields (3.3v Only!)Designed by BurgessWorld Custom Electronics in United States of America
This Board has been updated to revision 2 which uses improved routing for the MicroSD card connector, allowing for full-speed access to the MicroSD card, up to 600Mhz CPU speed. All new orders wil...Read More…
This Board has been updated to revision 2 which uses improved routing for the MicroSD card connector, allowing for full-speed access to the MicroSD card, up to 600Mhz CPU speed. All new orders will receive Rev 2 boards, which have a BLUE solder mask
You can buy this board pre-assembled with a Teensy 4.0 by selecting the options on the right.
Supercharged Mainboard for Teensy 4.0 (Teensy not included)
Based on the Arduino DUE footprint, you can use Arduino DUE and MEGA prototype boards to expand your projects (not compatible with shields as the end-connector is used differently)
Teensy is removable for use in other projects
Breaks out all Teensy pins, including ON/OFF and PROGRAM Note: In Rev 2 of the board, pins 34-37 are connected via open solder jumpers to prevent the long traces from interferring with the MicroSD card.
Compatible with 3.3v Arduino UNO R3 Shields - Teensy 4.0 IO pins are NOT 5V tolerant
Onboard 5v and 3.3v regulators give you plenty of power for your projects
Onboard ESP-8266 model-12E pre-installed - adds WIFI functionality
Dedicated port for BT-12/HC-05/HC-06 Bluetooth master/slave module (module not included)
Dedicated port for NRF24L01+ 2.4ghz radio transceiver (module not included)
WIFI - ESP-12E MODULE OF CHOICE PRE-INSTALLED
NRF24L01 - module not included
Bluetooth - module not included:
LIGHT SOLDERING REQUIRED
Board comes with all SMD components pre-installed and tested (except coin-cell holder)
You will need to assemble/solder:
INCLUDED IN PACKAGE
Arduino-Teensy4 v1 with SMD components pre-soldered - TEENSY NOT INCLUDED
Hardware to connect Teensy
You will need to install the library you will find in my github repo in order for the test sketches to work: ITEADLIB_Arduino_WeeESP8266-master_TEENSY.zip
|Shipping Rate||Ships From||First item||Additional items|
United States Postal Service: Standard Ground Rate
Richard | March 3, 2020
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!