The simplest way of stripping 5V from a USB cable. Useful for 3D printers used with Octoprint.Designed by Brian Lough in Ireland
What is it? This is a basically a pass through device for USB Type A connectors that doesn't connect the 5V line. it has a Male connector and one end and a Female connector at the other. How is th...Read More…
This is a basically a pass through device for USB Type A connectors that doesn't connect the 5V line. it has a Male connector and one end and a Female connector at the other.
Well basically it is simple, non-intrusive way of solving a problem that 3D-printers connected to Octoprint machines have, their screen stays on, even when their PSU is off because they are still receiving 5V via USB.
The new version of the PCB now breaks out the pins from the female USB connector (can be seen in the third image above), I've found this useful for adding 5V back into a USB device that is power hungry (such as an external hard drive), especially if using an extension cable.
Plug the Power BLough-R directly into a USB port of the computer running Octoprint and plug the printer's USB cable into the Power BLough-R. Your Octoprint machine will be able to communicate with your printer as normal once your printer's PSU is on.
This has been a little bug bear of mine for a while and wanted to come up with a simple solution for it. Up to this I was plugging out the USB cable every time I turned off my printer.
I also wanted to make a PCB and this is my first ever one, as you might be able to tell. It's certainly not the most complicated device, but it achieves what I set out to do!
There are other solutions to this problem, some people have taken to cutting traces on boards, others have modified the USB cable (either by cutting the 5V line or placing tape over the connector), but I thought this would be a nice, non intrusive way to achieve the goal.
One of the people who bought a Power BLough-R created a case for it and it's awesome! It's a press fit case and it works perfectly. Please leave a rcolbert a message or a like on thingiverse for doing a fantastic job.
Easy, all through hole. Once you place the USB headers on top of the PCB (as shown in the picture) you really can't go wrong!
If you are looking to buy more that I have listed, or if one particular option that you are looking for is out of stock, please contact me and I should be able to arrange listing it for you!
The Power BLoughR works with most printers, but there are some exceptions. Some printers, such as the Prusa MK3, already separate the printers 5v from the USB 5v. When you use the Power BLoughR with these printers, nothing powers the USB to serial chip, so it will not appear in the port drop down in Octoprint. A good general test to know if you need the Power BLoughR or not is, with the printer off, plug in the USB. If the screen turns on, the Power BLoughR should work for you.
|Shipping Rate||Ships From||First item||Additional items|
An Post: Standard Ground Rate
Sean | Oct. 21, 2020
Donald | Sept. 4, 2020
Donald | Aug. 17, 2020
Gordon | July 18, 2020
Michael | Feb. 19, 2020
Gunther | Jan. 29, 2020
Patrick | Aug. 1, 2019
James | Feb. 8, 2019
Ludovic | Feb. 5, 2019
Josh | Dec. 21, 2018
Sven Are | Oct. 27, 2018
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!