Connect a microSD filesystem to your Arduino without looking up pinouts. This handy MicroSD Breakout Board plugs into your Arduino breadboard project, no jumpers. Or, use it with any microcontroller project for data logging, music file playback, and more.
What about power, level shifting? All taken care of. Run your project on 5V or 3.3V.
Fingernails not required. Fat fingers welcome. Finally, a microSD socket that isn't a pain in the butt to use.
All you need to do is solder on the pin headers.
- Pins align to 28-pin ATmega328P so no jumpers needed.
- Add pin headers to plug into breadboard power strip, no jumpers needed.
- Onboard level shifter means inputs are 5V safe.
- Onboard regulator so you can power from 5V or 3.3V supply.
Order one now and I'll send it your way as fast as possible.
Need power? Check out eeZee Power
Open Source Hardware repository
Be sure to join the Bot Thoughts Store Forum for updates and help.
Designed and assembled in the United States of America.
Ask the first question!
Rates to United States
|Shipping Rate||First item||Additional items|
|United States Postal Service: First Class||$2.75||$0.10|