Tindie

  2. DIY Electronics
  3. ATtiny4313 development board

ATtiny4313 development board

Designed by Bot Thoughts Llc
(2)
$7.99

Shipping to United States starts at $4.49

+-

Want an ATtiny4313 with that? Or 2313?

Do you want crystal and capacitors included?

Fully assembled with all components soldered on?

Add to Wishlist On Wishlist
On 11 Wishlists

Programming and prototyping with the venerable ATtiny4313 couldn't be easier.

The ATtiny4313 is a great choice for simpler projects. In a smaller 20-pin package, you get up to 20MHz ATmega speed, a good ADC, and you can use hardware Serial and either hardware SPI or I2C.

  • AVR ISP header included so you can program the chip in place.
  • SMT 0.1uF and 10uF filtering capacitors pre-installed
  • Reset switch included, SMT 10K pull-up resistor pre-installed
  • Works with ATtiny2313, ATtiny4313; add one to your order
  • Program with Arduino IDE
  • Designed for breadboard prototyping; all pins exposed
  • Add an 8, 10, 12, 14.7456, 16 or 20MHz Crystal and caps to the board
  • Smallest possible design saves space

Want chips with that? Add an ATtiny4313 to your order.

Write Code

Flashing the Chip

The eeZee Tiny Family

usflag Designed, fabricated and assembled in the United States of America.

2 reviews

Product:
Documentation:
Shipping:
Communication:
Avatar
Reviewed By

Nice Board

- ATtiny4313 development board
Good quality board, nice layout. I only wish the pads for the chip socket were a little larger. Also, rounded corners would be nice. It was a perfect no-jumper target board for programming a few ATTiny2313V's. I'd recommend this to anyone.
Avatar

Response from the Seller

Dec. 10, 2013
The new version features bevel cut corners. I'll make a note to revise the chip socket pads when it's time to restock. Thanks for the feedback!
Avatar
Reviewed By

Great Board

- ATtiny4313 development board
If it were big enough to make the crystal an option. Many people use the Tiny's with the internal oscillator. This board makes the oscillator mandatory. This ties up two pins that might be otherwise be I/O and for my use relegates it to a programmer board for programming devices and recovering others that were programmed for a crystal oscillator. Not one of my favorite X313 breakout boards. Good quality though, Very Good Quality. The same high level of quality as the 84 board.
Bob
Avatar

Response from the Seller

Aug. 17, 2013
Thanks for the feedback. Based on your input I went ahead and launched Tindie fundraisers for no-crystal versions of this board https://www.tindie.com/products/bot_thoughts/attiny23134313-breakout-no-crystal/ --Michael
Rates to United States
Shipping Rate First item Additional items
United States Postal Service: First Class
$4.49 $0.00

Store Owner

Avatar

Quantity Price
1-4$7.99
5+$6.99