USB LIION / LIPOLY Battery charger pico module, lithium polymer, lithium ionDesigned by PeMi Technology, Ships from Slovakia
Want more DIY ??? go to www.tindie.com/stores/kitsforkids/ Subscribe for newsletter and stay informed about new products and discounts here ... www.pemi.technology
This is the tiniest (12mmx15mm) little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithiu...Read More…
This is the tiniest (12mmx15mm) little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into pins other end. There are one two color LED - While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy.
Charging is performed in three stages: first a preconditioning charge, then a constant-current fast charge and finally a constant-voltage trickle charge to keep the battery topped-up. The charge current is 500mA.
For use with LiPoly/LiIon batteries only! Other batteries may have different voltage, chemistry, polarity or pinout.
Comes assembled and tested 5V input via PCB-style USB connector or user can add optional mini, micro or metalic USB A connector For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells) 500mA charge current
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Visit my personal page http://www.pemi.technology/ subscribe for newsletter and stay informed about new products and discounts.
I am independent hardware developer, all product are designed and assembled by my hands in heart of EUROPE, in Slovakia.
I am sorry if I can not offer prices like products from Chinese factories.
I am using components from European suppliers.
No pick and place machines only hours of soldering, testing and programming ...
Visit my new store https://www.tindie.com/stores/KitsForKids/
I am established on market since 2015.
During years, I managed to make and sell:
- more than 500 pcs Attiny85 development board - PicoDuino.
- more than 500 pcs coin cell battery chargers.
- more than 50 pcs KITs for self-assembly (DIY) Kits for Kids.
- more than 100 pcs LED wrist watches and Clocks.
- more than 2000 orders orveral to all world countries.
I have a high level of support and always solve all the problems.
My products are based on open Arduino platform and
you can always get the latest firmware, modify an existing firmware or write your own.
I am working to improve products permanently.
Testing a new technologies and expanding the possibilities is my vision and joy of life!
I have a very wide product line, check my stores.