DIL40 adapter for the SAM 15x15 board.Designed by Albert van Dalen in Netherlands
With the DIL40 adapter, the square SAM 15x15 board can be used on a standard double-strip breadboard. The kit contains: Adapter PCB Header 1.27mm Header 2.54mm USB micro B connector Tactile switch...Read More…
With the DIL40 adapter, the square SAM 15x15 board can be used on a standard double-strip breadboard.
The kit contains:
The SAM 15x15 is an Arduino development board of 28x28mm, with the same powerful controller as the Arduino Zero: the SAMD21G18. Despite the small size, it has more I/O pins than the Arduino Zero or SAMD21 Mini/Dev Breakout: 34 instead of 21.
The SAM 15x15 has to be connected to the adapter board by the use of the 1.27mm pitch headers. Soldering all the connector pins is a lot of work, so I recommend soldering only the pins that are required, and also some pins to hold the headers. In any case, solder pin 3 (GNDA), 4 (3.3V), 34 (reset) and 36 (GND).
|Shipping Rate||Ships From||First item||Additional items|
PostNL: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!