Artic ELF EM-Wave Generator

This is an electronic unit that has been designed to generate a number of Schumann resonance and Brain wave EM-Wave field frequencies.

The unit is able to generate the following EM-Wave field frequencies;

Schuman Wave Resonance Frequencies

• 7.83Hz: Fundamental Schumann resonance frequency.

• 14.3Hz: First harmonic of the Schumann resonance frequency.

• 20.3Hz: Second harmonic of the Schumann resonance frequency.

• 27.3Hz: Third Harmonic of the Schumann resonance frequency.

• 33.8Hz: Forth harmonic of the Schumann resonance frequency.

Brain Wave EM-Wave Field Frequencies

• 1-3Hz: Delta Wave Frequency

• 4-7Hz: Theta Wave Frequency

• 8-12Hz: Alpha Wave Frequency

• 13-38Hz: Beta Wave Frequency

• 39-42Hz: Gamma Wave Frequency

EM-Wave Field Frequency Selection

Selection of the required EM-wave field frequency is via the "SELECT" push-button on the front panel. Pushing this button will cycle through the available EM-wave fields. A confirmation beep is generated once the selected EM-Wave field has started to be generated by the unit.

There are lots of interesting books, research work and discussions about Schumann wave fields and the practical applications. However, all agree that Schumann EM-Wave fields play an important part in promoting mind and body health.

Why I made it

I made this unit as there was nothing currently available that can produce the full range of Schumann resonance frequency waves and harmonics. Also, I wanted a unit that can generate brain wave EM-Fields to help with sleeping and work focus. Thus, the Artic ELF EM-Wave generator was created to produce Schumann resonance waves and Brain wave fields.

Another reason for creating the unit is to provide stronger EM-wave fields. Other EM-wave generators are usually very low power (0.5Watt or less) and are only suitable for use in one room, their weak fields not extending into the other areas of the home or work place.

The Artic EM-Wave generator, due to the high-power output of approx. 3Watts, will produce an EM-Wave field that extends to most areas of the work place, home, upstairs and basement. The wide field range allow the Artic unit to be located in a more suitable location or hidden if required.

Features and Functions

• The Artic EM-wave generator uses a clean sinusoidal wave to generate the required EM-Wave field. A sinusoidal wave was chosen as it does not contain harmonics so all the output power in concentrated within the frequency required.

• Providing a number of different EM-Wave fields allows the Artic EM-Wave generator to be used for many different applications - body and mind health & meditation to name two areas of application.

• The EM-Wave field coil used by the unit is an "air-core" design. This type of coil design (low Q factor) ensures that the EM-Wave coil has a wide natural band-width (with limited self-resonance) and thus a wider range of EM-Wave frequencies to be transferred into the coil and thus the EM-field produced, keeping power losses in the generation process to a minimum.

• Once the Artic EM-Wave generator is set to the required EM-Field frequency it can be left turned on and running 24 hours a day. The unit also contains a self-calibration and diagnostic feature that will ensure the EM-Wave field frequencies are always generated as intended.

My Business Website: www.articsw.com

Changes from V1 to V1-1

• The LED's now dim to a low level after the resonance frequency has been selected.

• The UNIT can be switched to a "STAND-BY/LOW-POWER" mode by holding the SELECT switch pushed for a few seconds. The unit is switched to normal mode on the next push of the SELECT switch.