Tindie

APixel ESP8266 Dev Board

APixel is a combination of a ESP8266 dev board with a WS2812B (Addressable RGB) LED all in one.

Designed by AprilBrother, Ships from China

$6.00

Ask a Question

Shipping to United States of America starts at $5.00

Sold out since Jul 24, 2018

Welcome to our store.

APixel is a combination of a ESP8266 dev board with a WS2812B (Addressable RGB) LED all in one.

What is it? A round shape ESP8266 dev board combination with a WS2812B (Addressable RGB) LED all in one. What makes it special? Onboard ESP-12 module Onboard WS2812B LED Female 1.27mm pins for upl...

What is it?

A round shape ESP8266 dev board combination with a WS2812B (Addressable RGB) LED all in one.

What makes it special?

Onboard ESP-12 module
Onboard WS2812B LED
Female 1.27mm pins for upload firmware
Pre-upload NodeMCU firmware based on SDK v1.4
6 gpios, 1 uart port

You can use the ESP8266 flasher to program it easy.

Note

There's no LDO on the PCB. So the VCC should be 3V ~ 3.6V.

The jumper S1 wire to the pin button1 (GPIO02) default. It will boots up the module if button1 sending a HIGH signal through a diaode to CH_EN. Change the jumper to another side for pull CH_EN to high.

Updating The Firmware

The pins P1 can used for flash firmware. We recommend use ESP8266 Flasher to do the job.
Please follow these steps to setup if you'd like develop with Arduino IDE.
AButton - A IFTTT button powered by ESP8266 and NodeMCU