Artistic PCB take on the classic map location pinDesigned by Pier 42, Ships from Canada
What is it? This is a classic map location pin. Now available in red and blue. A reverse mounted LED is shining through the PCB to provide a bright homing beacon. The LED is driven by a 3V CR2032 c...Read More…
This is a classic map location pin. Now available in red and blue. A reverse mounted LED is shining through the PCB to provide a bright homing beacon. The LED is driven by a 3V CR2032 coin cell through a simple 200 Ohm current limiting resistor. This provides ~5mA for the LED to balance brightness against battery life. A micro-switch can turn the LED on and off without the need to remove the battery, easily accessible on the top of the pin. The batteries I have tested lasted more than 6 hours at reasonable brightness.
The battery is not included in the shipment!
I decided to explore the artistic PCB realm and the map location pin became the theme. See also my other map location pin. Modern Map Location Pin
It glows in the dark and helps you never being lost by always telling you where you are. ;) And it is not a badge. The board and soldering is all lead-free assembled.
A circuit for a quasi-constant current supply is also designed onto the board, to run the LED from 5-20V without a battery. Here the LED can also be controlled by an additional external signal. This requires additional components and wires soldered to the pin and makes it not as mobile but would be a good option for a more permanent wearable installation. Contact the seller for details about this circuit.
|Shipping Rate||First item||Additional items|
Canada Post: Small Packet - USA Air
Canada Post: Tracked Packet - 7 business days
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I am an Electrical Engineer by day and not designing enough PCBs. So I decided to do some more during the night and sell them here.