Plug in a MS3 Pro module in this board and you have a full plug and play MS3 Pro ECU for a 99 - 05 MiataDesigned by WestfieldMX5, Ships from Belgium
I designed this board for all models of the NB 99-05 MX5 (1.6 and 1.8). It's to be used with the DIY Autotune MS3 Pro module. You just plug in the MS3 Pro module and install the board inside the ...Read More…
I designed this board for all models of the NB 99-05 MX5 (1.6 and 1.8). It's to be used with the DIY Autotune MS3 Pro module.
You just plug in the MS3 Pro module and install the board inside the stock ecu case, ultimately ending up with a “MSPNP-PRO”. For clarity, the pcb is made for a standard MS3 Pro module, no modifications are necessary to the MS3 Pro or its firmware.
You are buying the bare pcb only. The components are not included. The MS3 Pro module is not included.
You will be getting V5.1
Full instructions included.
To get your ms3 pro module running, you only need the ecu connector, usb connector, map sensor, two 1K resistors and the header pins. That's it. Then plug in the Ms3 pro module and the board is ready.
usb connector pullup resistors for all in- and outputs proto area with gnd, 5V and 12V RS232 to TTL (for internal bluetooth module) CAN port map sensor (MPX-4250AP or the MPXH6400A equivalent in SMD footprint) 2nd map sensor for baro correction (MPX-4250AP or the MPXH6400A equivalent in SMD footprint) All unused in- and outputs can be brought out to the mazda connector in case you have extra functions. All information is on the front and back silk to make it easier to do modifications. It’s just a matter of adding a resistor or a jumper. circuits to install a TinyIOX 2 VR circuits 5 analog conditioners Bluetooth Wifi active high fuel pump circuit for 1.6 cars 4 active low inputs 1 active high input EGT circuit knock input ...
|Shipping Rate||First item||Additional items|
Bpost: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!