Solderdoodle - Hot knife, needle, and scooper tips to remove 3D Print defects plus soldering attachments! Recharge from a USB port!Designed by Solarcycle, Ships from United States of America
A portable, cordless, USB rechargeable soldering iron and 3D print finishing tool with the ability to last at full power for over a half hour above 800ºF, over 2 hours above 500ºF, and charge from ...Read More…
A portable, cordless, USB rechargeable soldering iron and 3D print finishing tool with the ability to last at full power for over a half hour above 800ºF, over 2 hours above 500ºF, and charge from a USB port. Includes: 1 USB cable + 2 tip removal tools + 1 cutter + 1 scooper +1 needle tip + 2 conical soldering tips + 1 chisel soldering iron tip.
You can literally go anywhere and still have a way to charge your Solderdoodle if there is a laptop, USB battery, wall adapter, or even a USB solar charger nearby!
Alternatively, you can use the Solderdoodle as a corded device, which means it can charge and discharge at the same time.
Time to Fully Charge @ 5V 2A: 2 hours | @ 5V 1A: 3 hours | @5V 500mA: 4.5 hours
Type: Panasonic NCR18650B Lithium-Ion
Size: Diameter: 1.6 inches
Length: 8.1 inches
Body Material: Nylon
Weight: 98g (3.5 oz)
Input Cable - 3' Nylon Braided Male USB Type A to Micro Connector
Input - Current: 450 to 1300mA | Voltage: 5 to 6 Volts
Output - Current: 1400mA | Voltage: 2.5 to 4.2 Volts
Battery Life Under Typical Use: Over 5 years
Provides over 2 hours of continuous working time
Heats up to over 700ºF (371ºC) in just 15 - 30 seconds
Solder up to 24 gage thick wire (Flux recommended for lead-free applications, thicker wire, or large ground planes)
Cuts PLA and ABS material
More information available at http://www.solderdoodle.com
|Shipping Rate||First item||Additional items|
United States Postal Service: Priority Flat Rate Box
$25.00 $ $25.00
$11.90 $ $11.90
$28.95 $ $28.95
$11.95 $ $11.95
$10.50 $ $10.50
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Solarcycle creates renewable energy generation and storage products. Basically, do the most with the least amount of energy possible. Branches of this research and product development led us to create Solderdoodle, a USB rechargeable soldering iron and 3D print finishing tool.
Visit our website for more information: http://www.solderdoodle.com