Introduction The Uno is a microcontroller board based on the CH340.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connectio...Read More…
The Uno is a microcontroller board based on the CH340.It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the CH340 programmed as a USB-to-serial converter Revision2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode. Revision3 of the board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit. "Uno" means one in Italian and is named to mark the upcoming release of 1.0. The Uno and version 1.0 will be the reference versions of , moving forward. The Uno is the latest in a series of USB boards, and the reference model for the platform; for a comparison with previous versions, see the index of boards.
|Shipping Rate||First item||Additional items|
China Post: Standard Ground Rate
DHL: Standard Ground Rate
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
Hi, everyone, our store is located at China, which is specilized in providing and research on smart hardwares, like development boards, modules, robot, drone, and the related accessories. Welcome to everyone to our store!