Open and inexpensive USB HID adapter for Logitech G25 / G27 pedals and shifters.Designed by RobotsRulz Store!, Ships from Russia
You may use this adapter to connect your Logitech G27 (or G25) shifter and/or pedals to your computer as separate USB device. All shifter buttons will work, gear positions are calibrated using cali...Read More…
You may use this adapter to connect your Logitech G27 (or G25) shifter and/or pedals to your computer as separate USB device. All shifter buttons will work, gear positions are calibrated using calibration software available to download on GitHub. Adapter was tested on Windows 10 and Windows 8.1. Tested with the following games and simulators:
This is updated version with USB Type B connector.
Will not work with Playstation or Xbox. USB cable is not included.
For Logitech G25 shifter two jumpers must be set to alternate position, see note on bottom of the adapter or contact me for details.
Adapter firmware can be updated easily using USB connection and STM32 DFU software. In case if you want to alter the firmware there is a JTAG/SWD connector for ST-Link/J-Link/etc. Board firmware is published on GitHub, see here: https://github.com/robotsrulz/SP_Adapter
The device may require calibration before first use, contact me for detailed instructions.
It's similar to Leo Bodnar's USB adapters for pedals and shifter but cheaper and open for collaborative development.
PLEASE READ THIS BEFORE MAKING AN ORDER:
Q: Hola, me puede dar una respuesta por favor...
A: I'd be happy to answer your questions in English or Russian if you provide a detailed description of your problem. I do not speak Google Translate, sorry.
Q: I cannot use shifter for navigation in GRID/GRID2 menus...
A: I don't have any possible game installed on my computer, sorry. However, this particular problem is described on Codemasters games forums, I am sure you can find it.
Q: Will it work with G29/G920/Driving Force Pro shifter?
A: Not tested, not guaranteed to work.
Q: My Hall sensor doesn't work with adapter, can you help me?
A: This adapter is intended to work with unmodified Logitech shifter/pedals. Keep in mind that pedals polarity is inverted and voltage is 3.3v, not 5v. While it may work with some alternative sensors (load cell amps for example) I cannot provide help for any possible combination, sorry.
Kirilll | June 10, 2019
Luan | Aug. 16, 2018
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!