Tindie

MIDI to CV Converter Midimuso CV-12 Octex

A fully assembled, working Midimuso 12 channel MIDI to CV converter with 8 routable, on-board 3.5mm output sockets.

Designed by Midimuso, Ships from United Kingdom

MIDI to CV Converter Midimuso CV-12 Octex 1

MIDI to CV Converter Midimuso CV-12 Octex 2

MIDI to CV Converter Midimuso CV-12 Octex 3

MIDI to CV Converter Midimuso CV-12 Octex 4

MIDI to CV Converter Midimuso CV-12 Octex 5

2018-07-31T11:41:01.628Z-IMG_20180713_170846 - Copy.jpg

2018-07-31T11:41:01.628Z-IMG_20180714_133316.jpg

2018-07-31T11:41:01.628Z-cv_12_v1_3_modes.png

2018-07-31T11:41:01.628Z-CV_12_1_3_top.png

Buy with confidence.

Our Tindie Guarantee protects your purchase from fraud. Learn More

A fully assembled, working Midimuso 12 channel MIDI to CV converter with 8 routable, on-board 3.5mm output sockets.

What is it? MIDI to CV converter Why did you make it? I wanted to make a routable / flexible MIDI solution for musicians What makes it special? Fully assembled. Converts MIDI into 12 control voltag...

What is it?

MIDI to CV converter

Why did you make it?

I wanted to make a routable / flexible MIDI solution for musicians

What makes it special?

Fully assembled. Converts MIDI into 12 control voltages and 6 gates. Allows 1V / 0.5V / 1.2 V per octave conventions. 11 modes which offer a balance of pitch / velocity voltages / control voltages / gates. Monophonic / polyphonic modes (up to 6 note poly per board) Chainable: boards can be connected together to produce more outputs. The jumpers can be removed and the sockets connected via dupont cables (provided) to any pin on ports B, C and D. The board uses the CV-12 pre-programmed uController and has many modes allowing for polyphonic use. Modes are selected by playing short midi files into the device (files are on the Midimuso site)

Extra 3.5mm jack socket boards for this board are available on Ebay or from the Midimuso site. Includes patch leads, the manual, the schematic and a continuity diagram. Requires a standard 12V power adaptor 2.1mm +ve centre pin. Please note, this kit is incompatible with pre-ORAC boards which do not support chaining.