Tindie

RFToy - Arduino-based RF dev. board, with OLED

(1 Review)

Arduino-based microcontroller board for Radio Frequency (RF) modules (433/315 TX/RX, nRF24L01). OLED included!

Designed by Rayshobby LLC, Ships from United States of America

RFToy - Arduino-based RF dev. board, with OLED 1

RFToy - Arduino-based RF dev. board, with OLED 2

RFToy - Arduino-based RF dev. board, with OLED 3

RFToy - Arduino-based RF dev. board, with OLED 4

RFToy - Arduino-based RF dev. board, with OLED 5

2017-09-04T02:50:49.938Z-rftoy1_8-500x500.jpg

2017-09-04T02:50:49.938Z-rftoy1_5-500x500.jpg

2017-09-04T02:52:20.396Z-rftoy1_9-500x500.jpg

Arduino-based microcontroller board for Radio Frequency (RF) modules (433/315 TX/RX, nRF24L01). OLED included!

RFToy is an Arduino-compatible microcontroller board for interfacing with Radio Frequency (RF) modules, including common 433/315MHz RF transmitters, receivers, and the nRF24L01 transceiver. Featu...

Features:

ATmega328p running at 3.3V 8MHz, uploaded with the Arduino bootloader.
Programming in Arduino through on-board mini-USB port.
One 128x64 OLED display, three tactile buttons.
20mm coin battery holder
Pin headers to fit RF transmitter, receiver, and on-board MOSFET power switches for them.
Pin headers for nRF24L01 transceiver.
3.5mm audio jack to output receiver signal to a computer's line-in port, to record and analyze RF waves.
Extra pin headers for connecting external components and breadboard experiments.

Package Includes:

One assembled and tested RFToy circuit board
One 128x64 OLED display
One CR2032 coin battery

Optional Add-ons (not included by default):

433/315MHz transmitter-receiver pairs
nRF24L01 transceiver
mini-USB cable

Technical Documents

Rates to United States of America

Shipping Rate	First item	Additional items
United States Postal Service: Priority Mail	$6.50	$1.00

Review Breakdown

Average Ratings

Product: (3.00)

Documentation: (5.00)

Shipping: (5.00)

Communication: (5.00)

Vichaya | July 24, 2015

The RFToy is good. The "nRF24L01+" is another story

The picture of the nRF24L01+ module is that of a good module (or at least a better clone, probably very hard to find genuine Nordic from Chinese suppliers). However, the module as shipped is one of those even worse-quality epoxy blob modules with known incompatibility with the genuine nRF24L01+/better clones. Lots of passives are missing ... inverted ACK bit due to error in the datasheet, etc.

https://ncrmnt.org/wp/2015/03/13/how-do-i-cost-optimize-nrf24l01/

I'll keep the RFToy, but will probably just trash the nRF24L01+ epoxy modules --- not worth the time to debug.