ATtiny10 Breakout Board with integrated status LED and a decoupling capacitorDesigned by Ravioli, Ships from Portugal
This is an ATtiny10 Breakout Board. Small size Integrated Status LED on pin PB0 Integrated 100nf decoupling capacitor ATiny10 Specs: Program Memory Size (KB) 1 SRAM Size (Bytes) ...Read More…
This is an ATtiny10 Breakout Board.
Integrated Status LED on pin PB0
Integrated 100nf decoupling capacitor
|Program Memory Size (KB)||1|
|SRAM Size (Bytes)||32|
|Timers||1 x 16-bit|
|Number of Comparators||1|
|Operating Voltage Range (V)||1.8 to 5.5|
To program it you need an USBASP with the latest firmware. USBASP Pinout:
|VCC||VCC (Pin 5)|
|GND||GND (Pin 2)|
Remember to put a pullup resistor on PB0
The ATtiny10 Breakout Board come with a blink sketch as showns in the demo below.
|Shipping Rate||First item||Additional items|
CTT: Regular Mail
CTT: Registered Mail
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!
I'm just an ECE Student selling his small ideas