Unlock all functionality of closed mode printing with affordable resin!Designed by ProtoART, Ships from Netherlands
Introduction This is a universal, resettable cartridge allowing you to print with any third party resin in closed mode on your Form 2 printer. This cartridge enables all functions like the heater, ...Read More…
This is a universal, resettable cartridge allowing you to print with any third party resin in closed mode on your Form 2 printer. This cartridge enables all functions like the heater, wiper and auto refill. These functions increase part accuracy and quality. The cartridge can be reprogrammed to any resin type and be easily reset when one liter of resin is used(normally, cartridges are disabled after 1 liter).
Why? Resins offered by the manufacturer for the Form 2 are expensive($180 per liter and up). There are third party companies like Photocentric 3D, ApplyLabWork and 3DResyns offering high quality and special resins for much less(as low as $60 per liter). However, they can only print in the so called "open mode", which disables the wiper, heater and auto refill of the tank.
Printing quality and accuracy is much higher when printing in closed mode and some resins can only be printed in this mode and will otherwise fail when printing. This cartridge allows you to use the full functionality of the machine with alternative resins.
Option 1 (Ready to run):
Two different options are offered as international shipping rates for complete cartridges can be very expensive. If you choose option 1, your cartridge is ready to run when it arrives. For option 2, you need to modify an existing cartridge (drilling 3 holes and soldering 2 wires). Simple instructions will be included in the shipping.
|Shipping Rate||First item||Additional items|
PostNL: Standard Ground Rate
Standard mailbox rate worldwide, no tracking(tracking included for complete cartridges, option 1).
$25.99 $ $25.99
$20.00 $ $20.00
$5.00 $ $5.00
$37.00 $ $37.00
$55.00 $ $55.00
We recognize our top users by making them a Tindarian. Tindarians have access to secret & unreleased features.
We look for the most active & best members of the Tindie community, and invite them to join. There isn't a selection process or form to fill out. The only way to become a Tindarian is by being a nice & active member of the Tindie community!